Auralex brandbaar en hergebruikbaar?

musicheaven

Ouwe rot
Lid sinds
4 december 2008
Berichten
3.916
Ik ga binnenkort es stevig investeren in studio-akoustiek
- 'k heb al een hoop artikels gelezen en ik ben er me van bewust dat je het ook zelf kan maken, maar ik denk dat ik ga opteren voor een setje van auralex.

ik vraag me echter af hoe het zit met

1 de brandbaarheid van auralex-platen? sommige mensen weten me te zeggen dat dit extreem brandbaar is, anderen zeggen weer van niet. En hoe zit het dan met de verzekering ivm brandveiligheid?

2 ik dacht dat die auralex meestal werd vastgemaakt met een setje meegeleverde lijmtubes - zijn de akoustische panelen achteraf dan nog eens te gebruiken, of zijn die gewoon volledig kapot als je die er achteraf terug afhaalt?

Alle tips welkom
 
dit vind ik bv op de site van auralex, maar dat kan toch nog op verschillende manieren geinterpreteerd worden of niet?

Are Auralex acoustical foam products fire retardant?
Yes. All Auralex acoustical foam products are fire retardant. Auralex acoustical foam is specifically designed to be fire retardant to better meet building and fire codes. This has always been the case with Auralex acoustical foam products since they are designed specifically for use as acoustical treatments. (Note: Auralex fire retardants are chemically added to the foam. They are not sprayed on.)

2. What is the difference between Auralex acoustical foam products and "bedding" or "packing" foam?
Since Auralex has been in business, our priorities have been (a) safety and (b) better sound. Auralex acoustical foam products are engineered to be (a) inherently fire retardant and (b) the best for treating acoustics. Many "bedding" or "packing" foams are (a) not fire retardant at all and (b) perform poorly as acoustical treatments. More than ever, Auralex encourages for the buyer to beware. Many "cheap" types of foam will not offer the levels of safety and acoustical control that Auralex acoustical foam products offer.

3. What happens if fire is exposed to Auralex acoustical foam?
It will smolder and smoke, but it will not burst into flames. If the flame source is removed or goes out, the foam will "self-extinguish." Again, this is due to the inherent fire retardant properties of Auralex acoustical foam products. (Note: Auralex does not encourage lighting or otherwise exposing flames or heat sources to foam products. Auralex cannot be held liable for the misuse of products or injuries caused by the misuse of products. Also - regardless of whether you use Auralex acoustical foam products - general safety "common sense" should prevail in your facility. Fire extinguishers, fire exits, etc. should all be considered with general safety in mind.)

The Standard for Surface Burning (ASTM E84 or NFPA 255) yields two numbers: "Flame Spread Index" and "Smoke Developed Index" These numbers are compared with three ranges called out in building and fire safety codes. The three ranges correspond to "Class A", "Class B", and "Class C." (Some codes refer to these as "Class 1", "Class 2", and "Class 3." The Class designations are interchangeable.) Depending on the results of the test, a material will fall into one of these three categories. "Class A" (or "Class 1") is the best, indicating that a material is not likely to burn very much, but may produce some smoke. "Class C" (or "Class 3") is the worst, indicating that a material will likely burn more and possibly even produce more smoke.

All Auralex acoustical foam products are "Class B." Without getting too technical, it means that Auralex acoustical foam products will burn a little more than a "Class A" material and will produce smoke.
Note that all "Classes" of foam are considered "fire retardant." The types of foam to be extremely wary of are those that have no "Class" designation at all. In all likelihood, these materials have no fire retardant properties whatsoever and Auralex discourages their use as acoustical treatments.​

6. So does "Class B" meet my building codes?
It depends. Unfortunately, building codes vary widely from place to place. There is no "nationwide" building or fire safety code that everyone follows. Literally, something considered acceptable for your building may not be considered acceptable for the same type of building in a town, say, four miles from you. If you are unsure at all about what is or is not acceptable for your building, you are strongly encouraged to contact your local fire marshal, fire inspector, or building inspector prior to purchasing any acoustical treatment products.

7. Are all the different Auralex colors and shapes of foam the same in terms of fire retardant properties?
Yes. In fact, each and every "bun" of Auralex acoustical foam that is poured is tested to make sure that the fire retardant properties are consistent for each and every Auralex acoustical foam product.

8. Is Sonomatt - the Auralex version of "egg crate" foam - fire retardant?
Yes. As mentioned in Question 7, each and every Auralex acoustical foam product - in any color or shape - is fire retardant and "self-extinguishing​
 
hoi fourier, bedank voor je reply

aan het monteren op houten panelen had ik reeds gedacht

ivm die brandbaarheid/verzekering heb ik nog geen uitsluitsel- de link die je zet is toch hetzelfde als ik citeerde, of zie ik iets over het hoofd?
de meningen op verschillende fora lopen uiteen ivm die brandbaarheid, en het lijkt me logisch dat auralex dat zelf zo aanprijst, maar kan iemand hier uitsluitsel over geven?

is er iemand die ervaring heeft met het monteren op panelen? fotootjes? :) :) :) voor de basstraps lijkt het me toch gecompliceerder?
 
is er iemand die ervaring heeft met het monteren op panelen? fotootjes? :) :) :) voor de basstraps lijkt het me toch gecompliceerder?

Ik heb er een hoop gemonteerd op kartonnen panelen,gewoon gekit...

1 tip : Auralex verkoopt kit om ze te monteren en ze vragen daar de hoofdprijs voor (ca. 20 euro)...haal gewoon normale montage kit (ca. 3 euro) bij de bouwmarkt,is hetzelfde spul...sterker nog,werkt makkelijker omdat Auralex z'n kit in niet-hersluitbare kit tubes stopt...

Eenmaal gemonteerd ( met de kit) zijn ze slecht los te krijgen,maar met een verfspatel kom je een heel eind...gebruik niet te veel kit,een paar strepen zijn genoeg...zorgt voor minder werk bij verwijdering (ik heb in mn oude studio heel wat weg moeten halen)...
 
ik zou ze niet op karton plakken maar bij de bouwmarkt van die dunne boardplaatjes (2mm ofzo) nemen, stukje steviger en werkt veel netter als karton. Gewoon op maat laten zagen en je bent klaar.
Klein tipje voor de maat van de platen, maak ze rondom iets van 1cm kleiner dan het paneel zelf, kijk je niet zo op de kopse kant van het hout.
Wat je kunt doen is 2 /3 gaten in die plaat boren aan de bovenkant en de platen met haken/schroeven aan de muur haken. Kun je ze er zo ophangen en weer wegtillen.
 
Ik heb hier de hele studio vol hangen met auralex, en t werkt echt top. Daarnaast waren alle materialen goed te bevestigen. T is alleen wel duur, heb geloof ik voor 2500 euro van dat schuim hier hangen...
 
en werken de basstraps van auralex effectief of zijn die minder effecicient dan van die cilinders rockwool?

en hoe zit het met de bouwveiligheid?
 
hoezo bouwveiligheid? Die dingen wegen niks toch?

[edit]Ow hehe, een poederblusser+rookmeldertje mss voor een veiliggevoel, qua brand zou ik me niet zo druk maken, je huis is toch slechts 1 brandcompartiment waarschijnlijk en er staat zat ander spul dat wil fikken, zoals alles van plastic,verwerkte houtproducten, textiel etc. [/edit]
 
met de basstraps heb ik geen ervaring, omdat ik ze in mijn studio niet nodig heb. de rest is echt verbluffend goed. Vorige week toevallig de studio nog doorgemeten, en op 3 hele kleine dipjes na, is alles volkomen recht. Dus t spul werkt echt...
 
ah verkeerd gelezen, waarom heb je die niet staan de basstraps? omdat je er andere hebt of zo? is over die basstraps dat ik met het meeste zorgen maak
 
Vraag me niet precies waarom, maar mijn ruimte is zo ontworpen, dat het in principe niet nodig is. De geluidsgolven van het laag komen precies op de juiste manier uit, omdat dat zo berekend is. Dat neemt overigens niet weg dat ik wel reflectie en absorptie panelen heb hangen op mijn achterwand.

Dit heb ik in de control room hangen:

http://www.auralex.com/acoustic_foam_sunburst/acoustic_foam_sunburst.asp
http://www.auralex.com/sound_diffusor_tfusor/sound_diffusor_tfusor.asp
http://www.auralex.com/sound_diffusor_qfusor/sound_diffusor_qfusor.asp

werkt perfect

Trouwens, in mijn opname ruimte heb ik alle auralex met gipsplaatschroeven tegen de muur bevestigd. Is dus altijd herbruikbaar.
 
Laatst gewijzigd:
ah super, bedankt pimpampeter. die dingetjes die jij hebt hangen lijken me nog een stapje hoger (en duurder) dan de roominator kit (1000euro ongeveer) waar mijn interesse naar toe ging
 
check ook soundonsound (.com) eens...
Wordt veel in geschreven over Auralex en ook over de bevestiging ervan...
 
Back
Top