• Het Marktplaats Archief kan als naslagwerk worden gebruikt. Alle advertenties die in het archief staan, zijn gesloten en dus niet meer actief. De aangeboden producten zijn niet meer te koop. Advertenties worden naar dit archief verplaatst als de eigenaar de advertentie heeft gesloten of wanneer er langer dan 30 dagen geen activiteit op een advertentie is geweest.

    Het heeft dus geen zin om de aanbieders te benaderen met vragen over een product dat niet langer te koop wordt aangeboden. Doe dit dan ook niet. Het voorkomt ergernis.

Eurorack: MFB Seq 3, MFB dual LFO, Blue lantern Joystick, Ladik mixer

Status
Er kan niet meer gereageerd worden.

Alphatronic

* * * * * *
Lid sinds
18 september 2004
Berichten
495
Locatie
Utrecht
Ik wil m'n mini systeempje toch een beetje anders inrichten.

Ladik mixer M-110. 3 kanaals mixer. 35 euro

MFB Seq 3, uitgebreide sequencer met 12 sporen. 200 euro

MFB dual LFO. 100 euro

Blue Lantern Joystick. slechts 6hp breed! Stuurt ook voltages uit als er niks in de inputs zit. 85 euro

foto's hier: marktplaats

Alles in nieuwstaat.
Ophalen in Utrecht of goed verpakt verzenden.
 
MFB seq 3 inclusief Thomann factuur van juni 2015 voor de garantie 190 euro

Blue Lantern joystick 75 euro

Samen 250 euro.
 
MFB Seq 3 is ook weg. Dus alleen nog:

Blue Lantern FM Joystick 75 euro.
Wat meer info:
6 hp joystick

Introducing the new 6hp fm joystick for the eurorack modular synth format.

It has been shrunk to 6hp! Some improvements were made for this new design. For example, a gate output was added corresponding to the joystick push button. This way you can trigger an envelope from it.

The module is thinner and "skiff-compliant". It is less than 2 inches thick behind the panel.
The module itself has an x & y axis, spring loaded joystick. The joystick also pushes in to act as a button.

There are two attenuverters, both with inputs for fm action. When the joystick is in the middle it is 0v on both axis. When nothing is connected to the input on the joystick axis' there is an internal voltage so that you can bend cv (from the output) of one of your other modules. A 100k trimmer is included so that you can adjust the internal voltage.
It is set at 6v when shipped. the push button outputs an internal gate voltage when nothing is connected to the top input. when you plug in something to the input it simply acts as a passive thru switch. You push the joystick to pass the signal.
specs:
1 x fm-bipolar input on x axis with its own output
1 x fm-bipolar input on y axis with its own output
1 home arcade soft touch joystick (like xbox)
1 internal gate output, activated by the push button

There are two 10k trimmers to adjust the 0v middle swing position.
There is a 100k trimmer to adjust the international positive voltage. 6v is a good setting.
 
Status
Er kan niet meer gereageerd worden.
Back
Top