Prijs: 350,- (zeer goed materiaal!!!) voor zowel productie als mixing.
type: Two-way near-field studio reference monitors
LF driver: 5-1/4 inch low-frequency drivers with mineral-filled polypropylene cones,
high-temperature tolerant voice coils and damped rubber surrounds
HF driver: 1-inch natural silk domes incorporating ferrofluid and internal damping technologies
LF amplifier power: 38W (EIA RS-490 dynamic power)
HF amplifier power: 38W (EIA RS-490 dynamic power)
crossovers: 4th-order Linkwitz Riley
crossover frequency: 3kHz
low-frequency rolloff: 6th-order filter
mid-boost in/out control
Acoustic Space Control: 0/-2/-4dB diffraction shelf
high frequency control: -2/0/+2dB
low-cut frequencies: 56/80/100Hz
input connectors: XLR balanced, TRS balanced/ unbalanced
input sensitivity: 85 mV pink noise input produces 90dBA output SPL at one meter with volume control
at maximum
input impedance: 20k ohms balanced, 10K ohms unbalanced
protection: RF interference, output current limiting, over temperature, transient on/off, subsonic
filter, external fuse
signal-to-noise ratio: > 100dB (typical, A-weighted)
frequency response: 56Hz - 20kHz
power indicator: power on/off indicator on front panel
power requirements: 115V/~60Hz or 230V/~50Hz (selectable); power via detachable 3-conductor line
cord
cabinet: vinyl-laminated MDF w/ Sub Frequency Port
dimensions/weight: 25 x 16.5 x 20 cm - 5 kg/unithttps://www.synthforum.nl/
type: Two-way near-field studio reference monitors
LF driver: 5-1/4 inch low-frequency drivers with mineral-filled polypropylene cones,
high-temperature tolerant voice coils and damped rubber surrounds
HF driver: 1-inch natural silk domes incorporating ferrofluid and internal damping technologies
LF amplifier power: 38W (EIA RS-490 dynamic power)
HF amplifier power: 38W (EIA RS-490 dynamic power)
crossovers: 4th-order Linkwitz Riley
crossover frequency: 3kHz
low-frequency rolloff: 6th-order filter
mid-boost in/out control
Acoustic Space Control: 0/-2/-4dB diffraction shelf
high frequency control: -2/0/+2dB
low-cut frequencies: 56/80/100Hz
input connectors: XLR balanced, TRS balanced/ unbalanced
input sensitivity: 85 mV pink noise input produces 90dBA output SPL at one meter with volume control
at maximum
input impedance: 20k ohms balanced, 10K ohms unbalanced
protection: RF interference, output current limiting, over temperature, transient on/off, subsonic
filter, external fuse
signal-to-noise ratio: > 100dB (typical, A-weighted)
frequency response: 56Hz - 20kHz
power indicator: power on/off indicator on front panel
power requirements: 115V/~60Hz or 230V/~50Hz (selectable); power via detachable 3-conductor line
cord
cabinet: vinyl-laminated MDF w/ Sub Frequency Port
dimensions/weight: 25 x 16.5 x 20 cm - 5 kg/unithttps://www.synthforum.nl/
