Specs:
The main features of the Tannoy ELLIPSE 8 include:
Futuristic design with high quality referencing
Frequency response: 40Hz - 50kHz
Maximum SPL (pair @ 1m): 112dB (anechoic)
Typical max SPL(pair @ mix position): 118dB
Distortion: <0.5%
Driver type: 200mm (8 inch) Tannoy Dual Concentric
SuperTweeter: 25mm (1 inch) Wideband SuperTweeter
Dispersion: 90 degrees horizontal (@6dB)
Amplifier Inputs: Balanced via XLR
Input sensitivity: +4dBu to -10dBu continuous
Power rating: LF: 150W, HF: 150W, ST: 30W
Signal/Noise Ratio: >1 00dB
Multi-function LED indicator: Green for: System on, Red
for: Stabilisation pior to system on. Fault (such as
DC), thermal trip, clipping of LF amplifier, Yellow
for:
VLF warning (presence of subsonic signals below 20Hz,
increasing in sensitivity down to 1Hz)
Trim Controls: Hi: Shelving filter +/-3dB @ 25kHz
(+/-1dB @ 4.5kHz), Mid: Bell filter +/-2dB @ 1.4kHz -
0.45Q, Low: Variable alignment LF hi-pass filter +/-3dB
@ 45 Hz (+/-1dB @ 90Hz)
Crossover Frequency: 1.7 kHz - 14 kHz
Enclosure type Laminated birch, reflex ported
Volume: 19.5 Litres
Dimensions: 373mm x 460mm x 350mm (14 5/8 x 18 1/8 x 13
3/4 inches)
Mains voltage: 100 - 120 V / 220 - 240 V 50 - 60 Hz
Mains fuse: T2.5A 250 V, T5.0A 125 V
Weight: 15kg (33lbs)
Finish: Grey suede paint (black on SuperTweeter)
Front baffle: panel MDF
Magnetically Shielded
