25 euro
DIGI96/8 PAD is the ultimate audio interface for Mac and PC. When using headphones the stepless volume fader control is very convenient, and in ADAT® mode the analog output can be routed to each of the 4 stereo pairs. An optional breakout cable adds professional AES/EBU connectivity using XLR-connectors.
Despite being built into a computer the card reaches stunning 112 dBA SNR! Professionals will enjoy the easy way to change the Emphasis bit and immediately listen to the changes in sound on the analog output. Playing back encoded AC-3 streams is compatible to every AC-3 decoder by setting the 'Non-Audio' bit.
Supported sample frequencies: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz
All settings changeable in real-time, all output options even in playback mode
Separate record- and playback circuits; complete master mode
Enhanced Full Duplex: Different sample rates at input and output possible
Mixed Mode: ADAT® in - SPDIF out and vice versa at full synchronization
AutoSync: Automatic and intelligent master/slave clock control
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
Optional Word Clock Module (WCM) provides word clock input and output
TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Unique status windows for record and playback, showing mode and sample rate
Zero Latency Monitoring: Hardware bypass per track, controlled by Punch-in/out
AutoSelect searches automatically for an input with valid signal
Combined Channel Interleave/Multi Device driver compatible to almost all recording programs
Complete interrupt-sharing
Windows driver with Pentium® optimization (quad times memory transfer)
High bus transfer rate (up to 130 MByte/s)
Digital inputs and outputs ground-free transformer coupled
Super low jitter design: < 1 ns in PLL mode (44.1 kHz, optical in)
32 bit memory transfer and 128 kB fast SRAM guarantee very low system load
Analog input +4 dBu/-10 dBV configurable
Superior analog 24 bit/96 kHz input. Dynamic range 109 dBA
Flexible superior analog 24 bit/96 kHz monitor output. Dynamic range 112 dBA
Low impedance output (75 ohm) ready for headphones, stepless output level through software faders
Speaker Protection minimizes noise during power on/off
Analog output routable to ADAT® tracks
Digital I/O: optical (TOSLINK), coaxial (phono), internal (CD-ROM/Sync-I/O). Optional breakout cable (not included in standard version) provides AES XLR connection.
Formats SPDIF-AES/EBU (Consumer, Professional), ADAT®
DIGI96/8 PAD is the ultimate audio interface for Mac and PC. When using headphones the stepless volume fader control is very convenient, and in ADAT® mode the analog output can be routed to each of the 4 stereo pairs. An optional breakout cable adds professional AES/EBU connectivity using XLR-connectors.
Despite being built into a computer the card reaches stunning 112 dBA SNR! Professionals will enjoy the easy way to change the Emphasis bit and immediately listen to the changes in sound on the analog output. Playing back encoded AC-3 streams is compatible to every AC-3 decoder by setting the 'Non-Audio' bit.
Supported sample frequencies: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz
All settings changeable in real-time, all output options even in playback mode
Separate record- and playback circuits; complete master mode
Enhanced Full Duplex: Different sample rates at input and output possible
Mixed Mode: ADAT® in - SPDIF out and vice versa at full synchronization
AutoSync: Automatic and intelligent master/slave clock control
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
Optional Word Clock Module (WCM) provides word clock input and output
TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Unique status windows for record and playback, showing mode and sample rate
Zero Latency Monitoring: Hardware bypass per track, controlled by Punch-in/out
AutoSelect searches automatically for an input with valid signal
Combined Channel Interleave/Multi Device driver compatible to almost all recording programs
Complete interrupt-sharing
Windows driver with Pentium® optimization (quad times memory transfer)
High bus transfer rate (up to 130 MByte/s)
Digital inputs and outputs ground-free transformer coupled
Super low jitter design: < 1 ns in PLL mode (44.1 kHz, optical in)
32 bit memory transfer and 128 kB fast SRAM guarantee very low system load
Analog input +4 dBu/-10 dBV configurable
Superior analog 24 bit/96 kHz input. Dynamic range 109 dBA
Flexible superior analog 24 bit/96 kHz monitor output. Dynamic range 112 dBA
Low impedance output (75 ohm) ready for headphones, stepless output level through software faders
Speaker Protection minimizes noise during power on/off
Analog output routable to ADAT® tracks
Digital I/O: optical (TOSLINK), coaxial (phono), internal (CD-ROM/Sync-I/O). Optional breakout cable (not included in standard version) provides AES XLR connection.
Formats SPDIF-AES/EBU (Consumer, Professional), ADAT®
