PMC TB2S A MKII Active Nearfield Monitor Set met garantie
Complete met bijbehorende spullen
Door prive redenen erg weinig gebruikt!
Test resultaat uit SoundonSound
pros
The PMC TB2S-A II Active Nearfield Monitor is the update of the hugely well regarded TB2SAs, with its greatly extended ATL (Advanced Transmission Line) and larger 6.5” LF driver which allows for higher SPL’s, greater bass extension and dynamics.
The PMC TB2S AII is the ideal high resolution monitor for critical evaluation within either small to medium sized control rooms in either stereo or surround when partnered with a TLE1S powered sub.
TB2S-AII increases the power from the previous module’s output of 100W to 200W, and radically reduces distortion producing a significantly cleaner, faster more neutral presentation across the full bandwidth.
The innovative ultra low noise design is not load dependant and along with the highly accurate ATL™ (Advanced Transmission Line) bass loading system, produces a supremely flat response. A single feedback loop circuit senses the loudspeaker load and adjusts the frequency response accordingly, making output impedance of this amplifier design extremely low and bettering many larger, audiophile ‘Class A’ analogue designs.
The PMC TB1S-AII Active Nearfield Monitor Main Features Include:
Useable freq response: 40Hz-25kHz Peak SPL @ 1M: 111dB
Effective line length: 1.5m 4.92ft
Drive units: LF Doped 170mm cast alloy chassis, HF 27mm fabric soft dome.
Crossover Frequency: 2kHz
Weight (each): 10.7kg
Amplifier: Input connection: Balanced XLR
Max power output: 200W
Vol Adjust: Min 16dB - Max 33dB
Idle power consumption: < 6W
Dimensions: H 400mm 15.7", W 200mm 7.8", D 350mm 13.7"
Prijs voor deze set; bieden vanaf 1799 euro
Complete met bijbehorende spullen
Door prive redenen erg weinig gebruikt!
Test resultaat uit SoundonSound
pros
- Tweeter and crossover upgrades have raised the standards yet again.
- Uncanny bass extension and power handling from such small boxes.
- Superb resolution and stereo imaging.
- The Flying Mole amplification approaches that of the Bryston amps, but without the weight, heat, or cost.
- The tweeter upgrade and Flying Mole amps are available for older systems.
The PMC TB2S-A II Active Nearfield Monitor is the update of the hugely well regarded TB2SAs, with its greatly extended ATL (Advanced Transmission Line) and larger 6.5” LF driver which allows for higher SPL’s, greater bass extension and dynamics.
The PMC TB2S AII is the ideal high resolution monitor for critical evaluation within either small to medium sized control rooms in either stereo or surround when partnered with a TLE1S powered sub.
TB2S-AII increases the power from the previous module’s output of 100W to 200W, and radically reduces distortion producing a significantly cleaner, faster more neutral presentation across the full bandwidth.
The innovative ultra low noise design is not load dependant and along with the highly accurate ATL™ (Advanced Transmission Line) bass loading system, produces a supremely flat response. A single feedback loop circuit senses the loudspeaker load and adjusts the frequency response accordingly, making output impedance of this amplifier design extremely low and bettering many larger, audiophile ‘Class A’ analogue designs.
The PMC TB1S-AII Active Nearfield Monitor Main Features Include:
Useable freq response: 40Hz-25kHz Peak SPL @ 1M: 111dB
Effective line length: 1.5m 4.92ft
Drive units: LF Doped 170mm cast alloy chassis, HF 27mm fabric soft dome.
Crossover Frequency: 2kHz
Weight (each): 10.7kg
Amplifier: Input connection: Balanced XLR
Max power output: 200W
Vol Adjust: Min 16dB - Max 33dB
Idle power consumption: < 6W
Dimensions: H 400mm 15.7", W 200mm 7.8", D 350mm 13.7"
Prijs voor deze set; bieden vanaf 1799 euro
