dextah
Ouwe rot
klein stukje nog
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
> CV: this was the easy part
> When you open the unit up you see the powersupply on the bottom on the left.
> You lifted the keys and now look at the back of them. Below the keys you see
> a long pcb with a row of resitors (?or diodes) on it and on the end (the
> right) the keyboard output wire black=ground and blue=cv . Now use a
> switching jack so that when nothing is plugged in there is connection
> between the keyboard and the blue wire and when a jack is inserted this
> connection is broken and the tip connects to the blue wire (which leads to
> the lower part).
> ******
> The sleeves of both jacks are connected to the black ground wire
(this one
> is not cut from the keyboard)
> ******
> Gate: Was a little bit harder since the gate is extracted from the cv signal
> comming from the keyboard.
> You 'll have to find the "KV" input on the first pcb on the right of the
> powersupply board (mine had a "SK" mark on it)
> It's on the right side of the pcb. Now use a switching jack so that when
> nothing is plugged in there is connection between the cable (which originaly
> was connected to the KV) and the "KV" input and when a jack is inserted this
> connection is broken and the tip connects to "KV"
>
> That's all...
>
> The unit now responds to v/Hz and positive gate.
>
> I removed the 2 cinch (tullip) connectors on the back and didn't even have
> to drill to fit the 2 mini-jack sockets in!
> Hah.

Origineel geplaatst door jes303
2 deksters?? hmmm, verdacht!