Alvarius
Stamgast
- Lid sinds
- 14 april 2014
- Berichten
- 284
Moog Three Band Parametric Equalizer in zeer goede staat.
Recent een totale revisie gehad van een erkende reparateur.
Zowel uiterlijk als geluidstechnisch in perfecte staat zoals je ze bijna niet tegen komt.
Ik heb het recent op ebay gekocht maar moet het helaas weer wegdoen.
Ik verkoop het ruim onder de gangbare prijs!!! Deze gaan tussen de 700-1200 euro. Mijn eerste vraagprijs is 550 euro. U mag vanaf dat bedrag bieden.
Hieronder de beschrijving van de reparateur die het verkocht op Ebay:
Moog Three Band Parametric Equalizer - The Moog Three Band Parametric Equalizer is an underestimated sound processing unit as most people do not know how to use them properly or have used them unserviced and noisy so they do not get to appreciate the true nature of the unit as it was intended to sound. The Moog MKPE is a Fully Parametric Equalizer with a very complete and wide range coverage capable of controlling the three primary equalizing parameters which are Amplitude, Center Frequency & Bandwith ("Q"). which most Parametric EQ's within it's price range wont offer or perform as this one does. It is a great unit for Low End thickening and/or slicing out unwanted resonances at any desired frequency. When used in conjunction with the Drive and/or Gain dB reduction or increase you can create anything from either a more transparent/subtle type equalizing or either a more overdriven boosting effect and that's where most people fail to realize the wonders this unit can make specially when they have been professionally serviced electronically and mechanically like all my units so thy can perform as they should. They sound like heaven...
Functions, Features & Input/Output Option:
- Low Section: 3 parameters are controlled in this section which are "Width Oct" or Bandwith ("Q") from .25 to 4 Octave Range, "Frequency Hz" or Center Frequency from 31 Hz to 4 KHz, "Height dB" or Amplitude from - 20 dB to + 20 dB.
- Mid Section: 3 parameters are controlled in this section which are "Width Oct" or Bandwith ("Q") from .25 to 4 Octave Range, "Frequency Hz" or Center Frequency from 62 Hz to 8 KHz "Height dB" or Amplitude from - 20 dB to + 20 dB.
- High Section: 3 parameters are controlled in this section which are "Width Oct" or Bandwith ("Q") from .25 to 4 Octave Range, "Frequency Hz" or Center Frequency from 125 Hz to 16 KHz "Height dB" or Amplitude from - 20 dB to + 20 dB.
- Drive Knob: Controls the internal operating level for Maximum Signal to Noise Ratio or to add Overdrive if desired to the input signal.
- Status In/Out Switch + LED: Turns On or Off the Equalizing Effect, LED lit indicates effect is On.
- Overload LED: Indicates when signal is distorted by overload.
- Gain Knob: Decreases or increases the Output Loudness Signal
- Power On/Off Switch + LED: Turns unit On or Off, LED lit indicates unit is On.
- Foot Switch: 1/4" Jack to turn On/Off the equalizing effect with a foot switch.
- Output: 1/4" Jack sends Output Signal.
- Input: 1/4" Jack receives Input Signal.
- AC Line Selector + IEC Hub: Line Selector Switch selects either 115 or 230 AC Power. Receives 120/240 VAC at 50/60 Hz, 30 Watts Max.
Recent een totale revisie gehad van een erkende reparateur.
Zowel uiterlijk als geluidstechnisch in perfecte staat zoals je ze bijna niet tegen komt.
Ik heb het recent op ebay gekocht maar moet het helaas weer wegdoen.
Ik verkoop het ruim onder de gangbare prijs!!! Deze gaan tussen de 700-1200 euro. Mijn eerste vraagprijs is 550 euro. U mag vanaf dat bedrag bieden.
Hieronder de beschrijving van de reparateur die het verkocht op Ebay:
Moog Three Band Parametric Equalizer - The Moog Three Band Parametric Equalizer is an underestimated sound processing unit as most people do not know how to use them properly or have used them unserviced and noisy so they do not get to appreciate the true nature of the unit as it was intended to sound. The Moog MKPE is a Fully Parametric Equalizer with a very complete and wide range coverage capable of controlling the three primary equalizing parameters which are Amplitude, Center Frequency & Bandwith ("Q"). which most Parametric EQ's within it's price range wont offer or perform as this one does. It is a great unit for Low End thickening and/or slicing out unwanted resonances at any desired frequency. When used in conjunction with the Drive and/or Gain dB reduction or increase you can create anything from either a more transparent/subtle type equalizing or either a more overdriven boosting effect and that's where most people fail to realize the wonders this unit can make specially when they have been professionally serviced electronically and mechanically like all my units so thy can perform as they should. They sound like heaven...
Functions, Features & Input/Output Option:
- Low Section: 3 parameters are controlled in this section which are "Width Oct" or Bandwith ("Q") from .25 to 4 Octave Range, "Frequency Hz" or Center Frequency from 31 Hz to 4 KHz, "Height dB" or Amplitude from - 20 dB to + 20 dB.
- Mid Section: 3 parameters are controlled in this section which are "Width Oct" or Bandwith ("Q") from .25 to 4 Octave Range, "Frequency Hz" or Center Frequency from 62 Hz to 8 KHz "Height dB" or Amplitude from - 20 dB to + 20 dB.
- High Section: 3 parameters are controlled in this section which are "Width Oct" or Bandwith ("Q") from .25 to 4 Octave Range, "Frequency Hz" or Center Frequency from 125 Hz to 16 KHz "Height dB" or Amplitude from - 20 dB to + 20 dB.
- Drive Knob: Controls the internal operating level for Maximum Signal to Noise Ratio or to add Overdrive if desired to the input signal.
- Status In/Out Switch + LED: Turns On or Off the Equalizing Effect, LED lit indicates effect is On.
- Overload LED: Indicates when signal is distorted by overload.
- Gain Knob: Decreases or increases the Output Loudness Signal
- Power On/Off Switch + LED: Turns unit On or Off, LED lit indicates unit is On.
- Foot Switch: 1/4" Jack to turn On/Off the equalizing effect with a foot switch.
- Output: 1/4" Jack sends Output Signal.
- Input: 1/4" Jack receives Input Signal.
- AC Line Selector + IEC Hub: Line Selector Switch selects either 115 or 230 AC Power. Receives 120/240 VAC at 50/60 Hz, 30 Watts Max.
