• Het Marktplaats Archief kan als naslagwerk worden gebruikt. Alle advertenties die in het archief staan, zijn gesloten en dus niet meer actief. De aangeboden producten zijn niet meer te koop. Advertenties worden naar dit archief verplaatst als de eigenaar de advertentie heeft gesloten of wanneer er langer dan 30 dagen geen activiteit op een advertentie is geweest.

    Het heeft dus geen zin om de aanbieders te benaderen met vragen over een product dat niet langer te koop wordt aangeboden. Doe dit dan ook niet. Het voorkomt ergernis.

Korg MS-04 pedaal

Status
Er kan niet meer gereageerd worden.

Mk II

Fris Gewassen Lid
Lid sinds
8 september 2002
Berichten
1.241
Locatie
mvhl
Te koop of ruil aangeboden een Korg MS-04 modulatie pedaal. Leuk hebbeding voor de MS fans maar ook zeer bruikbaar; ook met alle andere synths met CV inputs. Cosmetisch een mager zesje (zie foto's) maar wel 100% functioneel en zeldzamer dan hanentanden. Richtprijs 200 euro of ruilen voor een Volca Bass met bijbetaling

LFO: WAVEFORM
Use this to select one of four LFO output waveforms: Cyclic sawtooth and rectangle waves for vibrato, a random noise waveform for random pitch and tone color variations, and a "glissando" waveform which is used with "bend" for stepped variations.
LFO: SPEED
This knob adjusts the LFO frequency or "speed" of variation. Turn clockwise to increase speed.
LFO: LEVEL
This adjusts the range of LFO variation. Press the pedal all the way down and set this knob to determine maximum variation.
BEND: WIDTH
This adjusts the range of (pitch) bend variation. Turn clockwise (+) away from the center click-stop for an upwards bend; turn counter clockwise (-) for a downward bend.
Press the pedal all the way down and set this knob to determine maximum variation.
LED indicator
This flashes on and off to indicate LFO speed when cords are plugged into output jacks. Useful for judging speed of vibrato, glissando and other effects.
PEDAL
Controls depth of modulation. Press all the way down for maximum modulation effect.
OUTPUT-1 Mode Selector
Use to select output mode for OUTPUT-1 jack. Can be set for LFO, BEND or a combination of the two.
OUTPUT-1 (x 1) jack
This is usually connected to the synthesizer VCO (FM IN) to control pitch variation. A maximum 1-octave variation is possible (+-1V maximum variation.)
OUTPUT-2 Mode Selector
Selects output mode for OUTPUT-2 jack.
OUTPUT-2 (x 4)
This is usually connected to the synthesizer VCF (fcM IN) to control tone color variation. Maximum variation is four times that of OUTPUT-1 (+-4V maximum variation.)
Output Selector
This determines which jacks will provide an output signal. It can be set for both outputs 1 and 2 together, or for just output 1 or just output 2 alone.
 

Attachments

  • ms04-1.jpg
    ms04-1.jpg
    34,4 KB · Bekeken: 134
  • ms04-2.jpg
    ms04-2.jpg
    35 KB · Bekeken: 111
schopje!

Niet te lang wachten want dan gaat-ie naar marktplaats of eBay
 
mag op slot

:slotje:
 
Status
Er kan niet meer gereageerd worden.
Back
Top