Doepfer A188-2

Status
Please reply by conversation.
Voor iets minder heb je ook de enkele bbd A-188-1D (4096) stages, geheel niet verkeerd:D
Die kun je horen op de Raul Pena demo's. De A-188-2 wel 1 nadeel, weliswaar 6 outputs maar schijnt wel noisy te zijn als je ze allemaal aan zet. :engel:
Important note (especially for A-188-1 users): The A-188-1 uses single BBD circuits, which can be adjusted to minimize the clock noise as the outputs of the used BBD circuits are symmetrical (for details please refer to A1881_adjustment.pdf, trimming potentiometer P10). By way of contrast the BBD circuit used in the A-188-2 (MN3011) has six asymmetrical outputs that cannot be adjusted to minimize the clock noise. In addition the clock noise of the six outputs adds up. From there the clock noise of the A-188-2 is more intense than of the A-188-1. This is caused by the properties of the MN3011 but not a mistake of the module ! If you feel that the clock noise is too much you have the right to return the unused module within 14 days (i.e. the module has no scratches or prints, e.g. from srewing into the frame).
 
Status
Please reply by conversation.
Back
Top