Erica Synths Elektor Formant

Erica-Synths-Elektor-Formant-678x381.jpg

Erica Synths Formant, de legendarische modulaire analoge synthesizer die alleen in tijdschriften verscheen, maakt een comeback als moderne doe-het-zelfkit.Eind juli organiseerde Sam Battle, alias Look Mum No Computer, een 24-uurs doe-het-zelf-evenement in zijn This Museum Is (Not) Obsolete, waar mensen de Elektor Formant soldeerden. Niet het origineel, maar een binnenkort verkrijgbare heruitgave van Erica Synths.

Het goede nieuws is dat het geen eenmalige actie zal zijn. Volgens Jacqnoise's Instagram-bericht brengt Erica Synths binnenkort het complete Formant-systeem uit als doe-het-zelfproject.

Erica Synths Formant is binnenkort verkrijgbaar. Girts heeft bevestigd dat het een bouwpakket voor gevorderde bouwers zal zijn. Reserveren voor de volgende doe-het-zelf-uitdagingen of vragen kunnen worden gesteld via edu@ericasynths.lvgevorderde bouwers zal zijn. Reserveren voor de volgende doe-het-zelf-uitdagingen of vragen kunnen worden gesteld via edu@ericasynths.lv

 
Niet voor mij dit, maar wederom een prima actie van Erica. Wat een fijn bedrijf is het toch.
 
Leuk zeg.
Heb wel al 4 Elektor Formant systems staan maar misschien een project voor tijdens de winterperiode. Afhankelijk van de prijs weliswaar.
 
Heb de video’s eens goed bekeken en het ziet er goed uit maar zal niet goedkoop zijn en de veel andere componenten gebruikt. Het 24db filter is voor me een groot vraagteken. Deze is NIET SEME MODULAIR

Ik heb de afgelopen jaren al de hele Elektor formant in een nieuw design gemaakt en met de zelfde schema’s en componenten en goedkoper en al gebouwd.

Jos van Ras
www.josvanras.com

PS. Look Num non Computer heeft in zijn oude formant systeem ook modules van mij geplaatst. Hij was zeer tevreden over de kwaliteit.
 
Laatst gewijzigd:
Jouw projecten verdienen een betere website. Ik zie dat je website is opgebouwd uit tabellen, en niet geschikt is voor mobiele users.
Als je een website maakt conform de huidige webstandaarden en wat aan SEO zou doen zou je waarschijnlijk meer bezoekers hebben en eventueel kopers van je modules. Het is slechts een tip. :)
 
@jras :
Passen jouw printjes achter de originele frontpanels?
Dat is ook zoiets. Als alles groter wordt moeten de draden ook weer langer worden. De kans op storing van ruis en brom wordt dan hoger + (mantel afscherming). En dan moet je er thuis ook nog maar eens ruimte voor hebben. Je armen worden `te kort` om overal gelijktijdig bij te kunnen. De hobby Wordt dan langzaam veranderd in een hout en metaal hobby die ook weer ruimte inneemt. Begin maar met je stellingen op stevige wieltjes te zetten.
 
Heb nog een hele berg originele liggen om af te maken. Maar kom er niet aan toe......
Frontjes, PCb's, potmeters , kasten alles eigenlijk al :-) Iemand interesse
Stuk of 80 modules, 4 kasten
 
According to Erica Synths, they kept the unique internal wiring of the modules so the system can also be played without patching, exactly as described in the original manuals.


It features 27 modules capable of producing the original sounds and much more. It includes:


  • SEQ – a sequencer (new module, not found in the original system)
  • 3 x VCO
  • 12 dB/Oct VCF
  • 24 dB/Oct VCF
  • RFM – formant filter module
  • FX module (new module, based on DSP found on Erica Synths FX modules)
  • COM – an updated Output module
  • INTERFACE module – MIDI-CV module
  • EF/RING – envelope follower and ringmodulator module
  • NOISE – noise and random voltage generators
  • DIVIDER – frequency divider module
  • WAVEPROC – waveshaper
  • 2 x VCA
  • PHASER – an 8-stage optical phaser
  • 2 x MIXER
  • DISPATCH – buffered gate and CV multiple
  • LFO
  • 2 x VC LFO
  • 2 x ADSR
  • ADSR CONTROLLER
  • DUAL S&H
 

Dit staat nu op de site vermeld:​


Select Elektor Formant System DIY Kit version​

Elektor Formant System Partial Kit (EU Plug)
€ 2300.00
Elektor Formant System Partial Kit (USA Plug)
€ 2300.00
Elektor Formant System Partial Kit (UK Plug)
€ 2300.00
Elektor Formant System Partial Kit (AU Plug)
€ 2300.00
Elektor Formant System Full Kit (EU Plug)
€ 3000.00
Elektor Formant System Full Kit (USA Plug)
€ 3000.00
Elektor Formant System Full Kit (UK Plug)
€ 3000.00
Elektor Formant System Full Kit (AU Plug)
€ 3000.00

Estimated shipping due August 21, 2025

EU customers: + VAT for customers in the EU without EU VAT registration number + shipping
Outside EU: + local taxation (VAT / trade tax / import duties) is applicable in the country of delivery + shipping
  • Worldwide delivery with UPS/Fedex/Latvian Post
  • Pay securely with Credit Card or PayPal
  • 24 month warranty

This gives you a monster system with 27 modules capable of original Elektor Formant sounds and much more, a valuable addition to any studio.

All modules are designed to be DIY friendly – they are just 35 mm deep, do not require wiring (except original wiring between modules) but since most modules are quite complex, the system is intended for advanced DIYers who have extensive experience in DIY electronics and have all necessary tools (multimeter, oscilloscope) for calibration and troubleshooting.

We cannot provide support with this project, and builders must rely on their experience and/or information on the build thread on Modwiggler.

Full kit includes all components to complete the system.

Partial kit that includes the enclosure, PSU, PCBs, panels, potentiometers, switches, jack sockets and custom parts to complete the modules, so the builder needs to source the generally available components – semiconductors and passive components available at most retailers. We do not make much profit on components, therefore, unless you have extensive stock of electronic components in your workshop, we highly recommend going for the Full kit.

Not confident in your soldering skills but want a Formant? Find trusted builders HERE on the ModWiggler forum.
 
Ik heb al 17 jaar een vintage Formant . En nu ook de JVR Dormant modules VCOs VCFs ADSR VCA LFO en dat klinkt net zo lekker. Aanrader.
 
Back
Top