Ik heb wat info gevonden ....
het onderste heb ik gedaan:
=========
I had this problem once with my 1212m.
What I did to fix it was, open up patchmix, click on the bottom right the monitor balance control knob. Turn it all the way to the left, and to the right, then back to centre, it fixed it for me.
=====
nevermind i fixed it, the tutorial told me to mute L and R, i unmuted them and it works, thanks
======
nadat ik deze 2 dingen had gedaan werken beide ingangen weer :confused:
vraag me af of dit bij de andere keren ook de oplossing was geweest .... erg vreemd allemaal
anyways nu doen beide ingangen het alleen neemt ie zwaar misvormt geluid op ...
heb geen inserts of wat dan ook ...
hier nog wat dingen die interessant zijn maar bij mij niet nodig waren:
Restore defaults is always a thing to try when problems arise. Try it and see if it does resolve your problem. If not....
Check your 1212M with an anlog loop back test. Start by loading the Product Default seesion template into PatchMix.
* Mute both PCI left and right inputs in PatchMix to avoid a feedback loop.
* Connect analog output to analog input via 1/4 inch cable to both left and right.
* Insert test tone on Main Mix inserts.
* If the Main Mix meters shows the same signal level between both channels, you should see the same signal level in both peak meters iof PatchMix PCI card left and right input strips.
* Remember to swap the cables to see of the problem follows the cable switch. If it does, the problem is rellated to the cable or how it is interfaced. If the problem does not follow the cable, then the PCI card would appear to be bad and need repair or replacment.
===
nu nog kijken of ik dat misvormde geluid weg krijg en alles moet werken ....
ik heb de emulator X preset geladen en zit in emulator x te samplen wat dus op t moment niet goed werkt
