Te koop aangeboden:
Behringer Shark DSP110
Alleskunner met voorversterker, phantompower, delay, noise gate, low-cut, compressor en feedback destroyer in 1. Handig in allerlei situaties, maar vooral live.
Wordt geleverd met originele voeding, maar zonder de papierrommel als handleiding en doos. De handleiding kun je van internet halen en dozen hebben ze wel bij de supermarkt.
Wat is zoiets in vredesnaam waard? Richtprijs: 50 euro maar bieden mag. Geen tientje bieden, daar koop je maar een kratje bier voor.
Ruilen? Alleen als je me positief weet je verassen.
Ophalen in Zwolle of eventueel versturen. Kosten dan natuurlijk voor de koper.
Plaatje voorkant:
Plaatje achterkant:
Nog wat interessant leesvoer:
SHARK®
Easy-to-use automatic FEEDBACK DESTROYER with additional learn function for reliable feedback suppression
* Variable delay line with up to 2.5 seconds of delay, adjustable in msec, meters or feet
* Ultra-musical compressor with adjustable density and speed parameter
* Extremely fast automatic noise gate with learn function and optional manual setting
* Musical low-cut filter with adjustable cut-off frequency
* Ultra-low noise microphone pre amp with 60 dB gain control and +48 V phantom power
* Level conversion from line to microphone level and vice versa
* Status LED’s for all 12 filters
* Two 24-bit A/D and D/A converters
* Servo-balanced inputs and outputs with XLR and 1/4" phone connectors
* Rugged external power supply for maximum signal integrity and headroom
* 6-segment clip level meter with clipping indicator
* 4-digit multi-function display
* 19" rack-mounting kit for 5 SHARKs (optional)
* Manufactured under ISO9000 certfied management system
SPECIFICATIONS
AUDIO INPUTS
Connectors XLR and 1/4" phone
Type RF filtered, servo-balanced input
Impedance 6 kW balanced, 3 kW unbalanced
Nominal Operating Level microphone or line level source (switchable)
Max. Input Level +19 dBu at microphone level and line level
AUDIO OUTPUTS
Connectors XLR and 1/4" phone
Type electronically servo-balanced output stage
Impedance 60 W balanced, 30 W unbalanced
Nominal Operating Level microphone level source or +4 dBu (switchable)
Max. Output Level +20 dBu at +4 dBu nominal level, -12 dBu at microphone level
SYSTEM SPECIFICATIONS
Frequency Response 10 Hz to 21 kHz
Noise > 92 dB at line level, unweighted, 22 Hz to 22 kHz
> 89 dB at microphone level, unweighted, 22 Hz to 22 kHz
THD 0.007 % typ. @ +4 dBu, 1 kHz, gain 1
DIGITAL PROCESSING
Converters 24-bit Sigma-Delta, 64/128-times oversampling
Sampling Rate 46.875 kHz
DISPLAY
Type 4-digit numeric LED display
POWER SUPPLY
Mains Voltages USA/Canada 120 V ~, 60 Hz, PSU DSP110UL
U.K./Australia 240 V ~, 50 Hz, PSU DSP110UK
Europe 230 V ~, 50 Hz, PSU DSP110EU
Japan 100 V ~, 60 Hz, PSU DSP110JP
General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
PHYSICAL
Dimensions (H * W * D) app. 2 .2" (56 mm) x 3.5" (88 mm) x 5.1" (130 mm)
Net Weight app. 0.5 kg
Behringer Shark DSP110
Alleskunner met voorversterker, phantompower, delay, noise gate, low-cut, compressor en feedback destroyer in 1. Handig in allerlei situaties, maar vooral live.
Wordt geleverd met originele voeding, maar zonder de papierrommel als handleiding en doos. De handleiding kun je van internet halen en dozen hebben ze wel bij de supermarkt.
Wat is zoiets in vredesnaam waard? Richtprijs: 50 euro maar bieden mag. Geen tientje bieden, daar koop je maar een kratje bier voor.
Ruilen? Alleen als je me positief weet je verassen.
Ophalen in Zwolle of eventueel versturen. Kosten dan natuurlijk voor de koper.
Plaatje voorkant:
Plaatje achterkant:
Nog wat interessant leesvoer:
SHARK®
Easy-to-use automatic FEEDBACK DESTROYER with additional learn function for reliable feedback suppression
* Variable delay line with up to 2.5 seconds of delay, adjustable in msec, meters or feet
* Ultra-musical compressor with adjustable density and speed parameter
* Extremely fast automatic noise gate with learn function and optional manual setting
* Musical low-cut filter with adjustable cut-off frequency
* Ultra-low noise microphone pre amp with 60 dB gain control and +48 V phantom power
* Level conversion from line to microphone level and vice versa
* Status LED’s for all 12 filters
* Two 24-bit A/D and D/A converters
* Servo-balanced inputs and outputs with XLR and 1/4" phone connectors
* Rugged external power supply for maximum signal integrity and headroom
* 6-segment clip level meter with clipping indicator
* 4-digit multi-function display
* 19" rack-mounting kit for 5 SHARKs (optional)
* Manufactured under ISO9000 certfied management system
SPECIFICATIONS
AUDIO INPUTS
Connectors XLR and 1/4" phone
Type RF filtered, servo-balanced input
Impedance 6 kW balanced, 3 kW unbalanced
Nominal Operating Level microphone or line level source (switchable)
Max. Input Level +19 dBu at microphone level and line level
AUDIO OUTPUTS
Connectors XLR and 1/4" phone
Type electronically servo-balanced output stage
Impedance 60 W balanced, 30 W unbalanced
Nominal Operating Level microphone level source or +4 dBu (switchable)
Max. Output Level +20 dBu at +4 dBu nominal level, -12 dBu at microphone level
SYSTEM SPECIFICATIONS
Frequency Response 10 Hz to 21 kHz
Noise > 92 dB at line level, unweighted, 22 Hz to 22 kHz
> 89 dB at microphone level, unweighted, 22 Hz to 22 kHz
THD 0.007 % typ. @ +4 dBu, 1 kHz, gain 1
DIGITAL PROCESSING
Converters 24-bit Sigma-Delta, 64/128-times oversampling
Sampling Rate 46.875 kHz
DISPLAY
Type 4-digit numeric LED display
POWER SUPPLY
Mains Voltages USA/Canada 120 V ~, 60 Hz, PSU DSP110UL
U.K./Australia 240 V ~, 50 Hz, PSU DSP110UK
Europe 230 V ~, 50 Hz, PSU DSP110EU
Japan 100 V ~, 60 Hz, PSU DSP110JP
General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
PHYSICAL
Dimensions (H * W * D) app. 2 .2" (56 mm) x 3.5" (88 mm) x 5.1" (130 mm)
Net Weight app. 0.5 kg
