ik neem aan van wel .....
1 vco synth
specs:
Catgirl Synth VCO (SQUARE and SAW) with VC Waveshapers (sine/saw/tri) and Sub Octave Generator. Attenuators on all audio and control voltage inputs
MFOS 24dB/OCT LowPass Filter with VC RESONANCE - Ripping OTA Gain Cell LPF with two attenuated audio inputs, 3 Freq CV inputs (2 w/attenuators) and one attenuated Resonance CV input.
Catgirl Synth Dual LFO- Two LFOs, each with dedicated Square, Pulse, Tri/Ramp/Saw, and Mix outputs. The pulse can be PWMed and the Triangle varied from Ramp to Triangle to Saw via a Front panel Potentiometer. The Mix outputs vary between the square and linear shapes and each LFO can be joined together and or swapped for intense modulation effects.
MFOS ADSR Envelope Generator- Classic ADSR with Gate and Trigger inputs and two Envelope outputs. The top output is a dedicated positive going Envelope for gating the amplifier. The second output can be switched between positive and negative going envelopes for use with the filter. Very cool (think micro moog, Juno etc)
Catgirl Synth Tube VCA/Timbral Gate- WARNING! This puppy can be quite volitile! YES! it uses a tube, albiet a subminiture tube. At modest settings this unit makes a fine VCA for Gating your oscillators when used in conjunction with a keyboard or sequencer. It features a bias switch and gain control for making level and distortion adjustments when pushing into overdrive. And this badboy will go into overdrive! The module features two inputs and the second input doubles as a positive feedback control when not occupied. Very intense subharmonic effects can be achieved with the feedback control.
Custom Rear Power Panel w/ Condor +/-15V 800mA Regulated Power Supply- heavy duty power switch, fuseholder and EMI decoupled power receptacle. Mounted on a custom 6U anodized rear panel.
GAS!!!!
