-
Het Marktplaats Archief kan als naslagwerk worden gebruikt. Alle advertenties die in het archief staan, zijn gesloten en dus niet meer actief. De aangeboden producten zijn niet meer te koop. Advertenties worden naar dit archief verplaatst als de eigenaar de advertentie heeft gesloten of wanneer er langer dan 30 dagen geen activiteit op een advertentie is geweest.
Het heeft dus geen zin om de aanbieders te benaderen met vragen over een product dat niet langer te koop wordt aangeboden. Doe dit dan ook niet. Het voorkomt ergernis.
FMR RLNA, Drawmer MX30, Electrix FilterFactory, Midi sport 4x4
- Thread starter Ytse
- Start date
- Status
Ytse
༼ つ ◕_◕ ༽つ
Ytse
༼ つ ◕_◕ ༽つ
Electrix FilterFactory
-MIDI controlled filter to automate and sequence every single control setting and movement.
-The buzz section gives you everything from a bit of extra punch right through to the 'in your face' sound of bands like "Nine Inch Nails, or the Chemical Brothers.
-Similar to the old hybrid synths of the 70's, FilterFactory is a true analog filter design with digital control.
-Extreme resonance and cutoff frequency control canmake any frequency sub-basement low or stratospheric with mind numbing self-oscillation.
-Four Filters in one. Choose between Low pass, High Pass,Band Pass, and Notch filters.
-The LFO (low frequency oscillator): Beat Divisions makes for instant groove changes.
-Five waveforms to choose from: Saw tooth, inverse saw tooth, triangle, square and random. All synch to Tap Tempo or MIDI clock.
-Single Shot ADSR emulator lets you play the filter without needing a keyboard.
-CV input allows most old monosynths to control the FilterFactory's frequency and track the notes you're playing.
-4 pole provides a big beefy Mono sound. 2 Pole provides a more controlled stereo signal.
-MIDI controlled filter to automate and sequence every single control setting and movement.
-The buzz section gives you everything from a bit of extra punch right through to the 'in your face' sound of bands like "Nine Inch Nails, or the Chemical Brothers.
-Similar to the old hybrid synths of the 70's, FilterFactory is a true analog filter design with digital control.
-Extreme resonance and cutoff frequency control canmake any frequency sub-basement low or stratospheric with mind numbing self-oscillation.
-Four Filters in one. Choose between Low pass, High Pass,Band Pass, and Notch filters.
-The LFO (low frequency oscillator): Beat Divisions makes for instant groove changes.
-Five waveforms to choose from: Saw tooth, inverse saw tooth, triangle, square and random. All synch to Tap Tempo or MIDI clock.
-Single Shot ADSR emulator lets you play the filter without needing a keyboard.
-CV input allows most old monosynths to control the FilterFactory's frequency and track the notes you're playing.
-4 pole provides a big beefy Mono sound. 2 Pole provides a more controlled stereo signal.
Ytse
༼ つ ◕_◕ ༽つ
Ook nog te koop:
FMR RNLA 150 euro
The Really Nice Levelling Amplifier (RNLA) is a compressor, of sorts, with a character that works well with vocals, bass guitar, acoustic guitars and two-mix sources. A friend describes the RNLA's tone as "thick and gooey". Some very well-outfitted RNLA users report that even with a full complement of expensive, vintage levelling amps/compressors, the RNLA still fills a niche that the others don't!
The sonic performance of the RNLA harkens back to the Really Nice Compressor's (RNC's) origins. The original RNC was, in fact, based upon an optical gain element that was ultimately rejected (and tucked away) due to its imparting of a sonic signature (i.e., "color"). However, just like trying to throw away a ball of adhesive tape, this one has also stuck with (to?) us! What's the old saying? What's old, is new again? The implementation is a little different (i.e., no opto) from the 1984 version, but the final sound is eerily similar...
FMR RNLA 150 euro
The Really Nice Levelling Amplifier (RNLA) is a compressor, of sorts, with a character that works well with vocals, bass guitar, acoustic guitars and two-mix sources. A friend describes the RNLA's tone as "thick and gooey". Some very well-outfitted RNLA users report that even with a full complement of expensive, vintage levelling amps/compressors, the RNLA still fills a niche that the others don't!
The sonic performance of the RNLA harkens back to the Really Nice Compressor's (RNC's) origins. The original RNC was, in fact, based upon an optical gain element that was ultimately rejected (and tucked away) due to its imparting of a sonic signature (i.e., "color"). However, just like trying to throw away a ball of adhesive tape, this one has also stuck with (to?) us! What's the old saying? What's old, is new again? The implementation is a little different (i.e., no opto) from the 1984 version, but the final sound is eerily similar...
Ytse
༼ つ ◕_◕ ༽つ
Ook nog te koop: Focusrite Liquid Mix 400 euro (evt met pci-e firewire kaart)
Dus:
midisport 4x4 60 euro.
Drawmer MX30 220 euro
Electrix FilterFactory 190 euro
FMR RNLA 150 euro
Focusrite Liquid Mix 400 euro (evt met pci-e firewire kaart)
Dus:
midisport 4x4 60 euro.
Drawmer MX30 220 euro
Electrix FilterFactory 190 euro
FMR RNLA 150 euro
Focusrite Liquid Mix 400 euro (evt met pci-e firewire kaart)
Ytse
༼ つ ◕_◕ ༽つ
Is de recessie ook hier al?
midisport 4x4 60 euro.
Drawmer MX30 220 euro
Electrix FilterFactory 180 euro
FMR RNLA 150 euro
Focusrite Liquid Mix 400 euro (evt met pci-e firewire kaart)
midisport 4x4 60 euro.
Drawmer MX30 220 euro
Electrix FilterFactory 180 euro
FMR RNLA 150 euro
Focusrite Liquid Mix 400 euro (evt met pci-e firewire kaart)
Ytse
༼ つ ◕_◕ ༽つ
Nog steeds te koop. Niemand een Drawmer?
Ytse
༼ つ ◕_◕ ༽つ
Technical Specification
(All measurements taken at +4dBu operating level)
* Input/Output Connections: XLR (Pin 2+) and Jack (unbalanced)
* Input Impedance: 20kOhm (bal) / 4kOhm unbalanced
* Maximum Input Level: +21dBu
* Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
* Bandwidth: <10Hz to 36kHz (-1dB)
* Noise at Unity Gain (gate off)
RMS: -101dB, 22Hz-22kHz
* Crosstalk: @ 1kHz >-100dB
@ 10kHz >-94dB
* Distortion
+4dBu input: <0.02%, 1kHz
+14dBu input: <0.2%, 1kHz (10dB gain reduction)
* Power Requirements: 115V or 230V at 50-60Hz 9 Watts
* Dimensions: 482 x 44 x 200mm
* Shipping Weight: 3.2kg
(All measurements taken at +4dBu operating level)
* Input/Output Connections: XLR (Pin 2+) and Jack (unbalanced)
* Input Impedance: 20kOhm (bal) / 4kOhm unbalanced
* Maximum Input Level: +21dBu
* Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
* Bandwidth: <10Hz to 36kHz (-1dB)
* Noise at Unity Gain (gate off)
RMS: -101dB, 22Hz-22kHz
* Crosstalk: @ 1kHz >-100dB
@ 10kHz >-94dB
* Distortion
+4dBu input: <0.02%, 1kHz
+14dBu input: <0.2%, 1kHz (10dB gain reduction)
* Power Requirements: 115V or 230V at 50-60Hz 9 Watts
* Dimensions: 482 x 44 x 200mm
* Shipping Weight: 3.2kg
- Status
