Akai ax 60 sampler connector ..
- Thread starter sonate
- Start date
vinnieq
Lidl
- Lid sinds
- 11 juli 2004
- Berichten
- 11.119
It's a 13-pin DIN connector. Only the first seven pins are used:
1 Ground
2 Voice 1
3 Voice 2
4 Voice 3
5 Voice 4
6 Voice 5
7 Voice 6
Pinss 8-13 are not used. The pins are arranged in three rows on four and one pin at the bottom. If you look at the pins of an unopened connector, pin number 1 is the upper left one. The schematic can also be found in the user manual of the Akai X7000 sampling keyboard and on the site for the VX600 on the Modifications page (see http://kunst.phlimburg.be/vx600/).
1 Ground
2 Voice 1
3 Voice 2
4 Voice 3
5 Voice 4
6 Voice 5
7 Voice 6
Pinss 8-13 are not used. The pins are arranged in three rows on four and one pin at the bottom. If you look at the pins of an unopened connector, pin number 1 is the upper left one. The schematic can also be found in the user manual of the Akai X7000 sampling keyboard and on the site for the VX600 on the Modifications page (see http://kunst.phlimburg.be/vx600/).
