Dave Smith Instruments Evolver

Status
Er kan niet meer gereageerd worden.

sensoryoverload

Stamgast
Lid sinds
16 november 2002
Berichten
117
Ik had nog gezocht op het forum maar kon deze synth niet vinden: Dave Smith Instruments Evolver.

http://www.davesmithinstruments.com

voor $500 krijg je dit:

Four oscillators in total: two analog, two digital
Analog Oscillator waveshape are Sawtooth, Triangle, Saw-Triangle, and Pulse (with voltage-controlled analog Pulse-Width modulation)
Digital Oscillators select from 96 wavetables from the Prophet-VS (128 x 12 bits), and 32 user-loadable (via MIDI) Wavetables (128 x 16 bits). The Digital Oscillators get trashy as the frequency gets higher, as with the original VS.
Hard Sync on the analog oscillators
FM and Ring Mod on the digital oscillators
Separate Glide per oscillator
Real voltage-controlled analog lowpass filters - not digital recreations. 4-pole/2-pole switchable, fully resonant. There are two separate filters, one for the left channel and one for the right.
Analog Voltage Controlled Amplifiers (VCA), again one for each channel.
Dual digital 4-pole Highpass filters (one per channel); place before or after analog electronics.
Stereo audio inputs; Noise generator
Envelope Follower and Peak Detect from External Input to use as modulation sources
External Input can be used to gate envelopes and/or step the Sequencer
Three snappy ADSR envelopes
Four LFOs (sync with sequencer and MIDI)
Dual (left and right channel) tunable feedback loops; modulate frequency and amount
Delay with 3 taps; each with separate time and amount modulation. Syncs to sequencer/MIDI. Normal feedback and additional feedback path through analog filters
Distortion! Digital, one for each channel, can be placed before or after analog electronics
3 Banks of 128 Programs for 384 total Programs - dump to/from MIDI
16 x 4 Analog-style sequencer - syncs with MIDI
Extensive Modulation capabilities, including audio-range modulation. Bipolar (+/-) modulation.
Easy to program matrix-style front panel with 8 endless-turn rotary encoders
 
vreemd dat je niets gevonden hebt...

vreemd dat je niets gevonden hebt...

... ik weet toch zeker dat er hier al eerder een discussie over geweest is. Ik meen zelfs dat 2 of 3 forummers hem al in huis hebben. Wellicht een gevolg van de verhuizing of eerdere crash?
 
Status
Er kan niet meer gereageerd worden.
Back
Top