mono-poly
Cheff Noodle
- Lid sinds
- 9 mei 2002
- Berichten
- 12.985
Modules:
106 Mixer (missing faceplate but i got a new one made)
Two 3-channel mixers with both separate and common outputs and level controls for each input.
-107 Voltage Controlled Mixer
two 5-channel mixers with both separate and common outputs. Input levels are controlled by externally applied control voltages usually derived from a model 114 touch controlled voltage source.
111 Dual Ring Modulator
Two independent ring modulators. Each output consists of the sums and differences between frequency components of two input signals. Original signals are suppressed about 55 dB.
114 Touch-Controlled Voltage Source
Ten independent, touch activated keys, each with a corresponding control voltage output and pulse output. The voltage outputs are particularly useful for controlling gates (110) or mixers (107), and the pulse outputs for initiating attach waveforms (180) or other events.
140 Timing Pulse Generator
Produces repetitive pulses at intervals of .005 to 20 seconds. Period and duty cycle may be controlled internally or by applied control voltages.
144 Dual Square Wave Oscillator
Two independent oscillators in one unit. Frequencies are continuously variable from 5 cps to 20 kc and may be controlled internally or with externally applied voltages. There is provision for wide band amplitude and frequency modulation.
156 Dual Control Voltage Processor
Serves to mix, compress and invert control voltages. Each channel has two control voltage inputs and an internal voltage source. Particularly useful for obtaining fine pitch control, transposition capability, and range compression of control voltage sources.
158 Dual Sine-Sawtooth Oscillator
Two independent oscillators in one unit. Frequencies are continuously variable from 5 cps to 20 kc and may be controlled internally or with externally applied control voltages. Waveshape is continuously adjustable from sine to sawtooth; oscillators may be wideband frequency modulated.
192 Dual Lopass Filter (rare one behind reverb panel but with cv control)
Two lowpass filters with cutoff frequencies variable from 200 cps to 20 kc. Slopes have sharp knees and are 12 dB/octave.
196 Phase Shifter
Shifts phase of input signal such that a 90 degrees (+/- 5 degrees) phase relationship between the two outputs is maintained from 5 cps to 20 kc. Used in conjunction with ring modulators for frequency shifting or for exotic visual displays.
Zero Halliburton case with a new switching psu
Als ruilwaar zoek ik:
EMS Synthi A (1 maar 2 mag ook)
EMS Synth E
Moog modular modules
Leuke mixer Studer of iets
RSF Kobol
Waarde Buchla ca 20K
