TR 707 / 727 midi message out?

Chinetti

Fortune favors the bold
Lid sinds
31 december 2002
Berichten
3.235
Ik wil graag midi uitsturen (niet midi sync, maar midi messages, dus doodsimpele noten) vanaf de 707 of 727. Vraag me niet waarom ik dat wil, ik wil het :D
Maar ik krijg het op beide apparaten niet voor elkaar, niet zoals de handleiding zegt dat het zou moeten. Het ontvangende apparaat staat goed ingesteld, dus daar ligt het niet aan, de midi kabel is dus ook prima in orde en zover ik weet de midi output op beide apparaten ook, midi-sync uitsturen gaat tenslotte wel prima.

Is het iemand ooit wel gelukt en mis ik iets?
 
Moet wel kunnen hoor. Ik gebruikte vroeger (in het pre-Ataritijdperk) een 707 om hele simpele sequences uit een DX27 te halen. Volgens mij gaat het alleen in Song-play mode (of was het nou Pattern-play). Je kunt dan alleen gechainede songs afspelen. De 16 pads kun je niet gebruiken om individuele noten uit te sturen in realtime. Da's wel jammer ja.
 
Bedankt heren.
Ik zal 's kijken of 't inderdaad werkt in een song mode, ook al lijkt het erop dat m'n plannetje mooi niet werkt. Ik hoopte met de pads dingen te kunnen triggeren.
En ik zal de 505 'ns aansluiten, 's kijken of 't daar wel mee lukt.

Mocht iemand anders nog van zowel de kous als de naad weten, kom maar op :)
 
Heb het zelf niet met m`n 707 geprobeerd. Met de 626 lukte het me wel te triggeren. Ging erg makkelijk. Je kan zelfs met de 626 aangeven welk midinootnummer je aan een "pad" wil toewijzen. Misschien heb je ergens een 626 slingeren? :D
 
De klank van de 626 is die van een 707 en een 727 ineen. In hoeverre de 626 (qua bijv midi-implementatie) weer verschilt van de 505 weet ik niet. Maar hieronder zie je een beschrijving hoe je het op een 626 kan instellen.

Enter track play mode.

Hold Shift and keep it held !

Press key 15 - SYNC/MIDI. The display should show 'Snc' then your current sync mode

While still holding shift, press the ENTER button 3 times.

The display should now be showing 'nbr' for note number

Still holding shift, press each of the instrument keys, and the display will show the midi note number assigned to that key.

Use the value up and down buttons to adjust the note number for each key.

If you want to change the note numbers for the second instrument on each key, you need to release the shift key, change the pad to it's second sound using INST CHANGE, then go back to the 'nbr' option.


While you're pressing SHIFT+ENTER after SHIFT+SYNC/MIDI you'll notice some other settings.


'om' ON/OFF turns midi OMNI mode on or off

'rch' sets the global midi receive channel for the 626

'tch' sets a separate midi TRANSMIT channel for each instrument - this works the same way as note number selection, and allows you to send triggers to different midi channels from the same pattern.

'Ex' is for transmission or reception of sys-ex dumps. Use up and down to switch between transmit and receive, and press START/STOP to start the dump

deze uitleg is afkomstig van http://www.colinfraser.com/misc/tr626seq.htm

succes!
 
Origineel geplaatst door Chinetti
Hmm... de 626 en 505 zijn geloof ik identiek, en komen soms zelfs overeen met de 707. Is het veel moeite om te vertellen hoe je het doet?
Als ik de 707 handleiding nog 'ns lees en goed begrijp, moet het kunnen... Als je wil, kijk 'ns op pagina 46 van de handleiding.

idd blz 44 t/m 46, staat in wat je zoekt!
succes!
 
In feite lijkt de implementatie van de 626 en 707 dus erg op elkaar...ik zeg...appeltje eitje, fluitje van een cent :)
 
Misschien als ik vanavond niet weer zwak ziek en misselijk ben ik ook even kan proberen.
Anders moet je maar een goedkope electrobe ER-1 kopen ofzo. Dan kan je heel makkelijk
per drukknop aangeven welke noot deze moet uitsturen.
 
Origineel geplaatst door Chinetti
Hehe, ik zou zomaar je uitnodiging kunnen aannemen hoor:D

We eten aardappelschotel :W
 

de 626 is geen 707+727 in 1, foei aan degene die dat zei


met een 505 lukt het zeker... zo stuurde ik vroeger de beats van een roland sampler aan..
herinner me dat het nooit lukte met de 707


dit onderwerp is al meerdere malen behandeld op synthforum!, gebruik de zoekfunctie
 
Okay, gelukt, aan de hand van deze tekst, die ik voor het gemak maar heb gecopieerd. Maar helaas, je kunt dus geen noten triggeren door op één van de 16 pads te drukken, het werkt alleen in track play mode, je moet dus een song programmeren, zoals Vinnieq al aangaf.

"The most difficult thing about using the TR-707 this way is programming the
notes you want to play the synthesizer. When your music is composed, arranged
and ready to record, first translate the notesinto MIDI note numbers. Next,
enter each note of the sequence individually into the TR-707 by hitting the
drum that corresponds to that note....Build patterns and combine them into
tracks, just as if yiu were programming a drum part...To feed MIDI note data
from the TR-707 to your synth, patch a MIDI cable from the TR-707's MIDI Out to
the synthesizer's MIDI In and select the track or pattern (i.e. the sequence
you just programmed) to send to the synthesizer. Set the TR-707 to the same
MIDI channel as that of the synthesizer, and follow
these three steps, in order, to program the 707 for MIDI Transmit Mode #2:

1. Enter Track Play Mode with the track not running.
2. While holding the Shift key down, push the MIDI Channel button, release it,
and, still holding down the shift key, press the Instrument Guide button. This
puts the TR-707 into MIDI Transmit Mode #1; we still need to get to MIDI
Transmit Mode #2, though.
3. Once again, hold down the Shift key and press the MIDI Channel button and
release it, but this time, while still holding down the Shift key, press the
Last Step button.

Now the TR-707 is in MIDI Transmit Mode #2. Press the Start key and notes
should start sounding the synthesizer."

Note: One of the problems with using the TR-707 in this way is note length,
unless you plan for triggered notes to be short too. "When you program the
synth sounds that you want to sequence with your TR-707, remember the total
time of all the envelope generator stages up to (but not including) the release
stage can be no longer than the sound on the drum machine."
 
Origineel geplaatst door rvooh

de 626 is geen 707+727 in 1, foei aan degene die dat zei


qua geluiden wel.... (volgens mij toch echt dezelfde samples....)
 
Origineel geplaatst door Chinetti
Als je het zou willen proberen, heel graag.
En ja, een ER of RM1-X zit al een tijdje in de planning, dus als dit niet werkt heb ik weer een extra reden om zo'n ding te halen.
Enneh... beterschap sander :)



Yummie :P

Hoe laat kom je aan? Of kom je niet meer, nu je erachter bent :D?
 
Back
Top