- Lid sinds
- 11 januari 2003
- Berichten
- 14.508
oberheim ob1
http://www.vintagesynth.com/oberheim/ob1.shtml
te koop 1500 op mp
kwas ff niet goed geinformed
is dus een egte sem [ discrete tek no logie ]
in wel een hele case
een gemiddelde two voice is ook al gauw 1500+
heb liever dan de 2 voice
maar goed
blijft een lekker bakkie deze oberheim
en is denk ik eenleuke naast een oddy / pro one / monopoly ofso [helaas effe wat duurder ook best zeldzaam zie ze nooit gaan hier o ]
http://www.sequencer.de/oberheim/obe...nthesizer.html
Tec
allows V/Oct control. Xmod but for OSC mixing it has only a 3-way switch. Envs Hardware: 2 CEM3310 EG
HUH TOCH CEMS ERIN !
FACKERS
ZIJN DER OBIE ONE USERS EN KUNNE DIE VERKLAREN OF T DE MAGIE HEEFT VAN EEN SEM MODULE
[IIG T FILTER ]
OBERHEIM OB 1
this 2 OSCed synth had everything one could dream of: pulse or triangular and both could be set in it's symmetry (like on the matrix 6) so you could have PWM pulse waves and everything between triangle and sawtooth (up/down)!!, syncable VCOs, 12 and 24dB/oct slope for the filter (lpf) amd 8 memories (eight!)
only "limitation" to the ob1 are those level switches for vco mix and noise etc.. 0dB,-3dB or off but: both VCOs got another subosc with these switches! so at least you have "4 OSCs"..
anyway it is a bit thinner than the SEM modules VCOs but more versatile. filters: same, it's 2 or 4 pole, compared to the "magic knob" on the SEMs to seamlessly "morph" from LPF via notch to HPF, the "OFF" position is BPF. on the OB-1 it is 12 or 24dB LPF only.
bowing the bender down adds some noise to the sound! sounds cool!
envs: quite fast!
lfos: well, average..
has Crossmodulation
and a nice noise mod on the lever
... OB 1
Bijgevoegde miniaturen:
Klik op de afbeelding voor een grotere versie Naam: ob1.jpg 2.jpg Bekeken: 0 Grootte: 9,7 KB ID: 43563 Klik op de afbeelding voor een grotere versie Naam: OB-I.jpg Bekeken: 0 Grootte: 17,7 KB ID: 43564
http://www.vintagesynth.com/oberheim/ob1.shtml
te koop 1500 op mp
kwas ff niet goed geinformed
is dus een egte sem [ discrete tek no logie ]
in wel een hele case
een gemiddelde two voice is ook al gauw 1500+
heb liever dan de 2 voice
maar goed
blijft een lekker bakkie deze oberheim
en is denk ik eenleuke naast een oddy / pro one / monopoly ofso [helaas effe wat duurder ook best zeldzaam zie ze nooit gaan hier o ]
http://www.sequencer.de/oberheim/obe...nthesizer.html
Tec
allows V/Oct control. Xmod but for OSC mixing it has only a 3-way switch. Envs Hardware: 2 CEM3310 EG
HUH TOCH CEMS ERIN !
FACKERS ZIJN DER OBIE ONE USERS EN KUNNE DIE VERKLAREN OF T DE MAGIE HEEFT VAN EEN SEM MODULE
[IIG T FILTER ]
OBERHEIM OB 1
this 2 OSCed synth had everything one could dream of: pulse or triangular and both could be set in it's symmetry (like on the matrix 6) so you could have PWM pulse waves and everything between triangle and sawtooth (up/down)!!, syncable VCOs, 12 and 24dB/oct slope for the filter (lpf) amd 8 memories (eight!)
only "limitation" to the ob1 are those level switches for vco mix and noise etc.. 0dB,-3dB or off but: both VCOs got another subosc with these switches! so at least you have "4 OSCs"..
anyway it is a bit thinner than the SEM modules VCOs but more versatile. filters: same, it's 2 or 4 pole, compared to the "magic knob" on the SEMs to seamlessly "morph" from LPF via notch to HPF, the "OFF" position is BPF. on the OB-1 it is 12 or 24dB LPF only.
bowing the bender down adds some noise to the sound! sounds cool!
envs: quite fast!
lfos: well, average..
has Crossmodulation
and a nice noise mod on the lever
... OB 1
Bijgevoegde miniaturen:
Klik op de afbeelding voor een grotere versie Naam: ob1.jpg 2.jpg Bekeken: 0 Grootte: 9,7 KB ID: 43563 Klik op de afbeelding voor een grotere versie Naam: OB-I.jpg Bekeken: 0 Grootte: 17,7 KB ID: 43564
idd datkan kan niet ! maf wel
HISTORY OF THE OBX ACCORDING TO VARIOUS INTERNET SITES





