WTPA bendable 8-bit sampler
- Thread starter etaoin
- Start date
Voor degenen die op versie 2 zitten te wachten: het kan elk moment komen.
Bericht van 1 oktober 2012:
"Party People,
So here's the news:
As many of you know I've been working on a ton of client work these last couple years -- the biggest of these jobs has been a really extensive home control system involving robots for a really REALLY fancy house in the Hamptons. It sounds glamorous, and sometimes is, but is more often than that a big challenging mess with tons of intense deadlines and frustrating problems.
So, that company's engineers have gone on vacation for the next ten days, which means my phone magically stopped ringing this morning. I've pushed aside most smaller client work as well for this period. My intention is to finally finish all things WTPA2 related and begin shipping within 10 days.
Today I've been going over the bootloader; it's just about done -- I'd expect to hear from me on that today or tomorrow morning.
After that, I will add remaining features and streamline ISRs (they're fast but clunky now).
After that, I will tighten up the UI -- I never re-wrote it for 8 buttons instead of six.
Lastly, I will write a manual.
Kits are already packed and ready to go out.
I'll keep you all posted on the progress here. Thanks for being so patient!
Best,
TB
"
Bericht van 1 oktober 2012:
"Party People,
So here's the news:
As many of you know I've been working on a ton of client work these last couple years -- the biggest of these jobs has been a really extensive home control system involving robots for a really REALLY fancy house in the Hamptons. It sounds glamorous, and sometimes is, but is more often than that a big challenging mess with tons of intense deadlines and frustrating problems.
So, that company's engineers have gone on vacation for the next ten days, which means my phone magically stopped ringing this morning. I've pushed aside most smaller client work as well for this period. My intention is to finally finish all things WTPA2 related and begin shipping within 10 days.
Today I've been going over the bootloader; it's just about done -- I'd expect to hear from me on that today or tomorrow morning.
After that, I will add remaining features and streamline ISRs (they're fast but clunky now).
After that, I will tighten up the UI -- I never re-wrote it for 8 buttons instead of six.
Lastly, I will write a manual.
Kits are already packed and ready to go out.
I'll keep you all posted on the progress here. Thanks for being so patient!
Best,
TB
"
Wouter Etc.
Nieuwkomer
En daar is ie dan. De WTPA-2. Ik heb hem gisteravond besteld. Paypal. 250 dollar, ongeveer 215 euro voor de kit met alles er op en er aan met verzendkosten, twee weken om te versturen naar Europa, dat wordt dus begin januari voor mij.
Hier the thread om te kopen: http://narrat1ve.com/forum/discussion/309/wtpa2-officially-released
Hier the thread om te kopen: http://narrat1ve.com/forum/discussion/309/wtpa2-officially-released
Wouter Etc.
Nieuwkomer
Opnemen via mono line-in jack of laden vanaf micro SD kaart.
Maar ik heb de manual nog maar deels gelezen dus zo heel precies weet ik het ook nog niet.
Hij is binnen en is super simpel te bouwen.... duidelijke uitleg
Alles werkt, even alles goed testen en nu nog ff leuk kastje bouwen..
Ik ga toch weer een lp-filter erin zetten en een lfo-tje... je hebt immers cv op de clock...
Alles werkt, even alles goed testen en nu nog ff leuk kastje bouwen..
Ik ga toch weer een lp-filter erin zetten en een lfo-tje... je hebt immers cv op de clock...
En jawel een aantal foto's van het afgeronde WTPA2 project !
Het was even proppen, maar alles past in de case...die had ik nog liggen ... en dat was het uitgangspunt :-)
Features :
WTPA2
- dual LFO (selfmade)
- S&H (Mfos)
- LPF (ssm2044)
- Modulatie op clock en filter
https://www.dropbox.com/s/q7j4x67by6rzk21/WTPA2%20all-1.jpg?dl=0
https://www.dropbox.com/s/cpfkxlqs5ej5dtd/WTPA2%20case%20inside-1.jpg?dl=0
https://www.dropbox.com/s/kjnvxxjpvqd6132/WTPA2%20closup%20mod-1.jpg?dl=0
https://www.dropbox.com/s/vwjbtfggbedbxs6/WTPA%20LFOFX-1.jpg?dl=0
https://www.dropbox.com/s/uk85o41csocbj9l/WTPA2%20bottom%20midi-1.jpg?dl=0
Het was even proppen, maar alles past in de case...die had ik nog liggen ... en dat was het uitgangspunt :-)
Features :
WTPA2
- dual LFO (selfmade)
- S&H (Mfos)
- LPF (ssm2044)
- Modulatie op clock en filter
https://www.dropbox.com/s/q7j4x67by6rzk21/WTPA2%20all-1.jpg?dl=0
https://www.dropbox.com/s/cpfkxlqs5ej5dtd/WTPA2%20case%20inside-1.jpg?dl=0
https://www.dropbox.com/s/kjnvxxjpvqd6132/WTPA2%20closup%20mod-1.jpg?dl=0
https://www.dropbox.com/s/vwjbtfggbedbxs6/WTPA%20LFOFX-1.jpg?dl=0
https://www.dropbox.com/s/uk85o41csocbj9l/WTPA2%20bottom%20midi-1.jpg?dl=0
Vergelijkbare discussies
