Door een ander thread kwam ik op het idee om eens een bericht te posten hoe men de synthesizers in de zgn. "Diagnostic Mode" zet.
Ik trap af met de JD-800 en de JD-990....wie volgt?
Ben ook nieuwsgierig hoe men de JV-1080 in deze mode krijgt.
De JD-800
1. choose the MULTI-MODE
2. press LEFT , RIGHT , EXIT at the same time
... now you are in the test-mode
to choose the different tests press EXIT and a BANK or NUMBER button.
EXIT + BANK 1 = RAM test
EXIT + BANK 2 = RAMCARD test
EXIT + BANK 3 = test of the 3 PCM ROMS
EXIT + BANK 4 = PCM CARD test
EXIT + BANK 5 = test of all buttons, if you press a button you'll see the
name of the button in the display
EXIT + BANK 6 = test of all LED's , move the pitch-bender to speed up or
slow down
EXIT + BANK 7 = test of the faders, move the faders and see what happens
EXIT + BANK 8 = test of the waveform fader
EXIT + NUMBER 1 = test of the Keys, the pichtbender and the mod-wheel, move
or press the wheels and the keys
EXIT + Number 2 = test of hold and expression pedal
EXIT + Number 3 = test of the keys and their velocity reaction
EXIT + Number 4 = test of the midi connection, test of the midi wires
EXIT + number 6 = test of the effects
EXIT + Number 8 = back to the normal MULTI_MODE
De JD-990
Press 'Dec' and 'Inc' at the same time and put the power on.
F1 = LCD test
F2 = LED test
F3 = SW & Encoder test
F4 = Memory test
F5 = Card test
F6 = Midi test
Utility + F1 = Sound test
Utility + F2 = Effects test
Utility + F3 = MSB Adjust
Utility + F4 = Exit test mode & load Facctory data (!)
If you don't want to loose the patches you editted, you should push "Utility" and "exit" at the same time.
Ik trap af met de JD-800 en de JD-990....wie volgt?
Ben ook nieuwsgierig hoe men de JV-1080 in deze mode krijgt.
De JD-800
1. choose the MULTI-MODE
2. press LEFT , RIGHT , EXIT at the same time
... now you are in the test-mode
to choose the different tests press EXIT and a BANK or NUMBER button.
EXIT + BANK 1 = RAM test
EXIT + BANK 2 = RAMCARD test
EXIT + BANK 3 = test of the 3 PCM ROMS
EXIT + BANK 4 = PCM CARD test
EXIT + BANK 5 = test of all buttons, if you press a button you'll see the
name of the button in the display
EXIT + BANK 6 = test of all LED's , move the pitch-bender to speed up or
slow down
EXIT + BANK 7 = test of the faders, move the faders and see what happens
EXIT + BANK 8 = test of the waveform fader
EXIT + NUMBER 1 = test of the Keys, the pichtbender and the mod-wheel, move
or press the wheels and the keys
EXIT + Number 2 = test of hold and expression pedal
EXIT + Number 3 = test of the keys and their velocity reaction
EXIT + Number 4 = test of the midi connection, test of the midi wires
EXIT + number 6 = test of the effects
EXIT + Number 8 = back to the normal MULTI_MODE
De JD-990
Press 'Dec' and 'Inc' at the same time and put the power on.
F1 = LCD test
F2 = LED test
F3 = SW & Encoder test
F4 = Memory test
F5 = Card test
F6 = Midi test
Utility + F1 = Sound test
Utility + F2 = Effects test
Utility + F3 = MSB Adjust
Utility + F4 = Exit test mode & load Facctory data (!)
If you don't want to loose the patches you editted, you should push "Utility" and "exit" at the same time.
