hardware variant Ableton filter delay?

ProtoHuman

Gepokt en gemazeld
Lid sinds
15 februari 2003
Berichten
6.666
Locatie
Weesp
In Ableton Live zit een hele gave filter delay. 3 delay's in parallel met elk hun eigen filters en sync mogelijkheden. Het is een erg tof effect om een simpel synth-lijntje heel veel power en breedte mee te geven.

Omdat ik liever met hardware werk, vroeg ik me af of een dergelijk effect ook in een hardware processor te vinden is. De processors die ik tot nu toe kon vinden hebben twee delay's parallel, en juist die derde er bij maakt het zo leuk ;). Bovendien zijn de filteropties niet altijd even uitgebreid.

Iemand een idee?
 

Attachments

  • filterdelay.jpg
    filterdelay.jpg
    81,5 KB · Bekeken: 126
De behringer V-verb heeft twee effecten die er op lijken.

Eentje met twee delay's in parallel, maar beide gebruiken dezelfde filter.
De andere is wel 3 delays in parallel, maar geen filters (alleen crossover voor de delay, dus een delay voor laag, mid en hoog.)

En natuurlijk kun je het na gaan bouwen in een Modular G2, maar om nou zo'n ding daarvoor te gaan kopen vind ik ook wat overdreven...
 
Dit misschien: FX DESINGER voor op de CHAMELEON

FX Designer is a digital audio effect processor implemented by 3D FX experts SpinAudio for the Chameleon. It has a flexible signal processing design that allows to produce such audio effects as chorus, flanger, phaser, spatial effects, various simple reverbs and any combination of above. Now you can run the famous FX Designer VST into a standalone rack, the Chameleon. No computer needed!

The main idea behind this soundskin is provide an easy way to create various delay based effects from the basic building blocks: comb and allpass filters. Many audio effects like phaser, chorus, flanger, reverb, delay are made by interconnecting these basic blocks into a network. For example chorus and flanger can be made by a series of parallel comb filters, phaser is a series of allpass filters and a basic reverb is a combination of 4 parallel comb filters followed by a series of two allpass filters.

But FX Designer is not just for creation of well-known effects that can be implemented standalone much better - it's designed to create new, unheard before effects. Take an example: With it it's possible to make a reverb that would sound like a room with sizes warping over time in impossible ways.

To create all that variety of the effects FX Designer offers 6 modulated delay lines with comb/allpass mode switch, 6 assignable LFOs and flexible tap signal router that allows to interconnect taps into a network.

Features:
- Six modulated stereo delay lines with Comb/Allpass filter type switch
- Six assignable stereo LFOs with five waveforms and stereo shift controls
- Flexible tap signal routing
- Low-Pass\High-Pass filter with controllable cutoff on each tap
 
Dit dan misschien wel: SOUTH POLE voor op de CHAMELEON

FEATURES:
- Filter Bank: 3 types of 24 dB filter (Low-Pass, Band-Pass and High-Pass) in parallel mode with each line out of four lines available. A total of 12 stereo auto-oscillating Moog-way conceived filters.
- Low Frequency Oscillator Bank: 3 LFO's with their 3 offset adders in each line connected directly to the Filter Controls (cut off, resonance and panning). A total of twelve 0-to-40 Hz logarithmic LFO's working in parallel mode. All parameters are easily and directly controllable with the knobs by the user (amplitude, frequency and offset).
- SP-Delay Unit: A 4-channel mixer followed by a logarithmic stereo Delay (1,1 milliseconds up to 11 seconds) gives the complete control of the 4 send levels, including a Random control of the echo times.
- Hot-Saturation Unit: A stereo Hot-Saturation Unit will slowly burn the sound. It works directly on the Filter Bank (after them, in lines 1 & 2, and before in 3 & 4). Great for emulating early electronic organs and really useful for those agressive drums and percussion.
- Global Mixer: A 3-channel stereo mixer allows you to separate the original sound, the line-processed sound, and the delayed sound to create the perfect balance for the final mix.

:D
 
Maar wacht Jim, er is nog méér!!

Dit dan: INFILTRATOR óók al voor op de CHAMELEON

Infiltrator is a creative sound-shaping tool for use in the studio and on stage, essentially based around two banks of powerful filters. It was principally designed as a powerful vocoder, but has evolved into something much more and is capable of working as a wide range of filtering FX and tools.
The principal purpose of Infiltrator is for vocoding using channel filter banks, as in the classical analogue vocoders. The 'Vocoder Mode' allows the emulation of nearly every kind of classic vocoder architecture, as well as the creation of brand new vocoder sounds. In addition to the traditional Synthesis and Analysis filter banks, there is a silence/voiced/unvoiced detector, a noise generator and a built-in synthesizer with twin oscillators for creating carrier signals and waveforms internally. There are also delay FX available on the inputs and outputs for all sorts of echo-based treatments.

FEATURES:
- Highly detailed control with physical units - e.g. 0.00001 seconds
- Two 24 channel filterbanks with up to 2/4/6/8 pole, with 11 filter types, including Peaking /shelving EQs, bandpass, notch, LP, HP and more
- Re-configurable architecture to create filter channels, EQs, multiband compressors, vocoders
- Multiple compressors/expanders/gates with lookahead
- Sophisticated silence/voiced/unvoiced detector
- Built-in MIDI monphonic synthesiser with twin oscillators and noise generator
- Ring modulation and FM synthesis features
- 8 sets of 3 assignable real time controllers for instant control
- Realtime control of all filterbanks for unheard-of Vocoding FX
- 3 LFOs for controlling the realtime controls to create fantastic automatic manipulation settings
- Quick/full edit modes - different editing levels for speed and simplicity or deep control
- Extensive metering and monitoring of internal signals
- Dynamic allocation of DSP resources, allowing different configurations to utilize the hardware fully
- Delay FX on the inputs, outputs, or internally in multiband mode for highly unusual frequency dependent delay FX
- Delay line maximum times extended to 5 seconds
- Dedicated delay line time parameter smooting
- Real Time Controller (RTC) target parameters, amongst them are Multiband filter x-over lo/hi frequencies
- Linkwitz Reilly filters in Multiband mode
- Noise input in Multiband mode

Mooi spul he? zo'n G2... :maffia: :biertje:
 
whaha je hebt me overtuigd :D

Maar goed, ik heb nog niets gevonden ondertussen...
 
Ik bedacht me net dat het waarschijnlijk wel met een Digitech Quad moet lukken. Dan ben je wel meteen 3 van de 4 engine's kwijt, maar goed.
En dat ding heb ik anderhalf jaar geleden juist verkocht omdat ik 'm behoorlijk tegen vond vallen.
 
je kunt natuurlijk ook een extern signaal (een effect send uit je mixer dus) je computer in sturen en hup, direct die filter delay in, midicontroller eraan vast en hopsaikdee, je hardware filter delay is daar... werkt echt!







een computer (zij het een desk- of laptop) is natuurlijk ook voor een aardig deel uit hardware in mekaar gezet.
 
Origineel geplaatst door falafelbiels
je kunt natuurlijk ook een extern signaal (een effect send uit je mixer dus) je computer in sturen en hup, direct die filter delay in, midicontroller eraan vast en hopsaikdee, je hardware filter delay is daar... werkt echt!







een computer (zij het een desk- of laptop) is natuurlijk ook voor een aardig deel uit hardware in mekaar gezet.
Ja kan op zich wel. Maar moet ik wel eerst een grotere geluidskaart kopen, en live vind ik dat ook niet zo handig. (laptopje meeslepen voor een delaytje vind ik wat overdreven....)
De D-two van TC kan het niet, heb ik al opgezocht. Echo pro is een goed idee, ik zal eens kijken.

Gek eigenlijk dat 't nergens anders in zit, 't is zo'n simpel effectje.
 
Eventide.
 
Wat betrefd de Echopro; die kan dit niet. Wel een vette presetbak met vintage moddeling. 8)
 
Origineel geplaatst door Flesje
Wat betrefd de Echopro; die kan dit niet. Wel een vette presetbak met vintage moddeling. 8)
Ja, dat ding ziet er inderdaad wel goed uit. Wel weer idioot dat je je eerst moet registreren op de website van Line 6 voordat je de manual kan downloaden :stupid.
 
Back
Top