Mooie dikke tripple chorus (solina?) van spaanse fabriekant.
Prijs is 390 ex btw.
Meer info op: http://www.synthoma.net/productos.html
élkorus
- Thread starter mono-poly
- Start date
Mooie dikke tripple chorus (solina?) van spaanse fabriekant.
Prijs is 390 ex btw.
Meer info op: http://www.synthoma.net/productos.html
HEXAGON
Gedeactiveerd account
- Lid sinds
- 28 september 2006
- Berichten
- 2.825
bout boven zie je spiegeling + frompeling in richting van het vastzetten ervan
onderste zie je enkel de spiegeling zonder verfrompeling van de plastic film
Vijs onderaan in de video [ kijk full screen op youtube] LELIJK
badassmothercrap amateuristische shit :/
Attachments
Laatst gewijzigd:
1) Voor 400 euro verwacht ik meer dan een door het in elkaar schroeven verfrommelde sticker op de voorkant.
2) Jij bent echt de laatste persoon die mensen moet vertellen om op te rotten omdat ze vervelend zijn. Als jij je echt al zo irriteert aan mij, hoe houd je het dan in godsnaam met je zelf uit?
mono-poly
Cheff Noodle
- Lid sinds
- 9 mei 2002
- Berichten
- 12.985
Je moet gewoon niet lullen over dingen waar je geen kaas van heb gegeten.
Dat is het zelfde als ik een beetje bijdehand ga lopen doen in een tread over softstynths.
Of wou je zeggen dat je niet zo loop te doen?
Ik spot het in deze tread en in die Serge topic ben je ook misselijk bezig.
400 euro is niet duur voor zo iets imho.
Dat is het zelfde als ik een beetje bijdehand ga lopen doen in een tread over softstynths.
Of wou je zeggen dat je niet zo loop te doen?
Ik spot het in deze tread en in die Serge topic ben je ook misselijk bezig.
400 euro is niet duur voor zo iets imho.
Ach en wee maar liefst TWEE nare opmerkingen in een van jouw geliefkoosde zelfgeopende topics waarvaan maar liefst EEN inderdaad niet onderbouwd was 
Je bent echt een gevoelige jongen Mono. Ik zal voortaan wat meer rekening houden met jouw tere gevoelens.
Nog succes met het verder vervuilen van je eigen thread, ik reageer niet meer in dit topic.
Je bent echt een gevoelige jongen Mono. Ik zal voortaan wat meer rekening houden met jouw tere gevoelens.
Nog succes met het verder vervuilen van je eigen thread, ik reageer niet meer in dit topic.
HEXAGON
Gedeactiveerd account
- Lid sinds
- 28 september 2006
- Berichten
- 2.825
Die gast had tenminste een andere methode moeten uitzoeken om die verfrompeling te voorkomen,de gaten in het rackframe doorboren bvb en de hex vijs met een moer langs binnenzijde aanschroeven dan ist opgelost,nu lijkt het niet alleen op diY maar getuigt ook nog eens van het amateurisme van die kerel.
mono-poly
Cheff Noodle
- Lid sinds
- 9 mei 2002
- Berichten
- 12.985
Ach en wee maar liefst TWEE nare opmerkingen in een van jouw geliefkoosde zelfgeopende topics waarvaan maar liefst EEN inderdaad niet onderbouwd was
Je liep gewoon te fucken.
En als je ergens geen kaas van heb gegeten kan je beter niks posten he.
Mooi.
Ik vul de topic aan met nuttige info.
Geen OT bulltshit deze heb ik ook gestart.
Akikaze
Japans voor 'Herfstwind'
Ik til er niet zo zwaar aan. Mijn Solina chorus heeft ook zelfklevers, maar is verder wel stevig in elkaar gezet.
locomilo
Gone too soon
De 310 ruist als een gek. Volgens mij kun je de input op dat ding alleen gebruiken om extern geluid door de spring reverb te halen (of die van mij is defect en werkt dan niet zoals het hoort).
Weet iemand nog andere analoge chorusjes van dezelfde kwaliteit?
Laatst gewijzigd:
Hi to the forum members
Hi to the forum members
Hi... I'm Sergio Koval, from Synthoma (Barcelona, Spain).This is just a test message. It's really difficult to me to understand the forum indications, because I can't read dutch language. I'm using google translation all the time
If I see this message posted, then I will write a more detailed text. Thanks for your patience. Regards. Sergio
Hi to the forum members
Hi... I'm Sergio Koval, from Synthoma (Barcelona, Spain).This is just a test message. It's really difficult to me to understand the forum indications, because I can't read dutch language. I'm using google translation all the time
If I see this message posted, then I will write a more detailed text. Thanks for your patience. Regards. Sergiotest: succesful... then: Hello !
test: succesful... then: Hello !
Hi to the forum members...
In first place, sorry for to write in english. It is the only way that I can contact with you. Even my english is not so good, but I will try to do my best effort
I friend of mine tolds me about the élkorus discussion on this forum.
I know about this forum, I visited it sometimes but I don't post anything due to the languaje barrier.
About the élkorus module, I've tryed to translate all the comments posted here about this topic, but the translator didn't clarify me all of them.
I will try to clarify some aspects:
Front Panel: The front panel has several red paint layers, then a white serigraphy ink process, and finally a car's varnish. All those layers (paint+varnish) produces a very dense film. So, when I tightened the screws of the front, they begin to wrinkle this film. The damage was done, and the lesson was learned: too much paint layers. Those images was taken from the first units. That error (and others) will be solved in the further units. There are no sticker on the front panel.
Design: The delay lines uses the TCA350Y BBD chip, like the Solina and Elka Rhapsody's delay lines, so the same distortion, noise and frequency response from those chorus would be expected here. However, the LFOs are very different from those designs. There are an explanation of them in my webpage, but I'm sure that most of you have read it yet.
There is a very useful control in the High LFO, the "clipping" factor, that converts the usual sine waveform gradually in a "trapezoid" or "truncated sine" shape. I found that control makes the sound more "granny" or "rough".
Red LEDs: The three red LEDs inside the unit are for monitoring pourposes only. They were installed temporarily and soon taked out. That shot was taken without any promotional use. Just a "freakie" photo
Juergen Haible design: The élkorus design is not based on the Juergen Haible's triple chorus. Both were designed in parallel ways. In fact, I ordered fifty TCA350's from a german supplier on april 2006. I'm an admirer of Haible's work. I'm consider myself a beginner compared with him.
Price: I can't talk so much about this topic. I have several costs and the unit is absolutely and carefully hand-made. Believe me, I don't have too much profits with the present price. I built it because I love that string ensemble's sound (I'm musician/composer, too
Well, I hope to have clarified some doubts about the élkorus.
If you have any further question about it, please write me to synthoma(at)synthoma.net. I will be glad in to answer all of your questions.
Best Regards
Sergio
PS: My greetings to that VP-330 owner of this forum, which I knew some months ago. Sorry, I can't remember your name
test: succesful... then: Hello !
Hi to the forum members...
In first place, sorry for to write in english. It is the only way that I can contact with you. Even my english is not so good, but I will try to do my best effort
I friend of mine tolds me about the élkorus discussion on this forum.
I know about this forum, I visited it sometimes but I don't post anything due to the languaje barrier.
About the élkorus module, I've tryed to translate all the comments posted here about this topic, but the translator didn't clarify me all of them.
I will try to clarify some aspects:
Front Panel: The front panel has several red paint layers, then a white serigraphy ink process, and finally a car's varnish. All those layers (paint+varnish) produces a very dense film. So, when I tightened the screws of the front, they begin to wrinkle this film. The damage was done, and the lesson was learned: too much paint layers. Those images was taken from the first units. That error (and others) will be solved in the further units. There are no sticker on the front panel.
Design: The delay lines uses the TCA350Y BBD chip, like the Solina and Elka Rhapsody's delay lines, so the same distortion, noise and frequency response from those chorus would be expected here. However, the LFOs are very different from those designs. There are an explanation of them in my webpage, but I'm sure that most of you have read it yet.
There is a very useful control in the High LFO, the "clipping" factor, that converts the usual sine waveform gradually in a "trapezoid" or "truncated sine" shape. I found that control makes the sound more "granny" or "rough".
Red LEDs: The three red LEDs inside the unit are for monitoring pourposes only. They were installed temporarily and soon taked out. That shot was taken without any promotional use. Just a "freakie" photo
Juergen Haible design: The élkorus design is not based on the Juergen Haible's triple chorus. Both were designed in parallel ways. In fact, I ordered fifty TCA350's from a german supplier on april 2006. I'm an admirer of Haible's work. I'm consider myself a beginner compared with him.
Price: I can't talk so much about this topic. I have several costs and the unit is absolutely and carefully hand-made. Believe me, I don't have too much profits with the present price. I built it because I love that string ensemble's sound (I'm musician/composer, too
Well, I hope to have clarified some doubts about the élkorus.
If you have any further question about it, please write me to synthoma(at)synthoma.net. I will be glad in to answer all of your questions.
Best Regards
Sergio
PS: My greetings to that VP-330 owner of this forum, which I knew some months ago. Sorry, I can't remember your name
Cool indeed!!!
Taking all that effort to translate Dutch language
thanx for posting again !
Taking all that effort to translate Dutch language
thanx for posting again !
Very good of you to present some factual information here!
I would like to test and compare your chorus some day.
Also, compliments for taking up the challenge to research, develop and to build this unit commercially.
Quite an effort. Good luck with it.
I would like to test and compare your chorus some day.
Also, compliments for taking up the challenge to research, develop and to build this unit commercially.
Quite an effort. Good luck with it.
HEXAGON
Gedeactiveerd account
- Lid sinds
- 28 september 2006
- Berichten
- 2.825
élkorus
Thanks for your friendly comments. I'm building 6 units of it right now (one of them for a holland customer) and I'm improving several aspects from the first two units.
Remember, if you have any question about this module (even technical aspects) please, write me to synthoma(at)synthoma.net.
Thanks, and my best regards.
Sergio Koval
Thanks for your friendly comments. I'm building 6 units of it right now (one of them for a holland customer) and I'm improving several aspects from the first two units.
Remember, if you have any question about this module (even technical aspects) please, write me to synthoma(at)synthoma.net.
Thanks, and my best regards.
Sergio Koval
