clavia nord rack x2
- Thread starter retketek
- Start date
Hevige
5$ Soundsystem
- Lid sinds
- 3 september 2012
- Berichten
- 116
Soms is het toch handig om even in de handleiding te duiken.
Op pagina 65 staat precies hoe het moet:
The Out Mode function allows you to set different output modes for Slots A/B and C/D:
• To set the output mode for Slot A and B, hold down SHIFT and press the “OUT MODE” button once.
Note however, that the setting you make for Slot A and B can affect Slot C and D as well, if the
setting ‘-cd’ is selected for Slot C and D, as described below.
• To set the output mode for Slot C and D, hold down SHIFT and press the “OUT MODE” button twice.
Pressing the button repeatedly will toggle between the settings for Slots A/B and C/D.
SETTINGS FOR SLOT A AND B:
Mode 1 (1.Ab or 1.Cd) is not recommended when using the Nord Lead 2X multitimbrally since one Pro-
gram can be set to Unison and another not, which might lead to a stereo image you might not expect.
Display Description
1.Ab; In this mode, all sounds are mono (as described above), except if Unison is
activated in which case the instrument automatically switches to stereo, using Outputs A and B. If
one Unison and one non-unison Program are layered, stereo is used.
2.Ab; This is a straight Mono mode. All Programs always appear with equal level at
Outputs A and B.
3.Ab; This is a straight stereo mode. All Program always appear with voices
alternating between Out- puts A and B.
4.Ab ;In this mode Programs assigned to slot A will appear at Output A, while Program
assigned to slot B will appear at Output B. This mode can be used when it is desired to treat two
sounds differently in an external mixer, for example in multitimbral MIDI work or when layering
sounds.
Op pagina 65 staat precies hoe het moet:
The Out Mode function allows you to set different output modes for Slots A/B and C/D:
• To set the output mode for Slot A and B, hold down SHIFT and press the “OUT MODE” button once.
Note however, that the setting you make for Slot A and B can affect Slot C and D as well, if the
setting ‘-cd’ is selected for Slot C and D, as described below.
• To set the output mode for Slot C and D, hold down SHIFT and press the “OUT MODE” button twice.
Pressing the button repeatedly will toggle between the settings for Slots A/B and C/D.
SETTINGS FOR SLOT A AND B:
Mode 1 (1.Ab or 1.Cd) is not recommended when using the Nord Lead 2X multitimbrally since one Pro-
gram can be set to Unison and another not, which might lead to a stereo image you might not expect.
Display Description
1.Ab; In this mode, all sounds are mono (as described above), except if Unison is
activated in which case the instrument automatically switches to stereo, using Outputs A and B. If
one Unison and one non-unison Program are layered, stereo is used.
2.Ab; This is a straight Mono mode. All Programs always appear with equal level at
Outputs A and B.
3.Ab; This is a straight stereo mode. All Program always appear with voices
alternating between Out- puts A and B.
4.Ab ;In this mode Programs assigned to slot A will appear at Output A, while Program
assigned to slot B will appear at Output B. This mode can be used when it is desired to treat two
sounds differently in an external mixer, for example in multitimbral MIDI work or when layering
sounds.
Vergelijkbare discussies
