Der_Mantie
Vintage lit
- Lid sinds
- 5 juli 2005
- Berichten
- 3.898
Zijn deze nog ergens nieuw te krijgen ?
of anders tweede hands.
of anders tweede hands.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Zijn deze nog ergens nieuw te krijgen ?
of anders tweede hands.
Edit - toch maar ff opgezocht (tis al zo lang geleden) double density waren dus die kleinere je zou t dan waarschijnlijk ook omgekeerd kunnen doen en ook opzoek gaan naar high density en dan een plakbandje over t extra gaatje plakken en formateren als double density ..


Gewoon zonder moeilijk te doen met plakbandjes werkt ook zonder problemen.
Het gaatje is er alleen voor een High Density drive om te detecteren dat er een HD floppy inzit.
Double density gebruikt die niet....

Higher density drives are built to read, write and even format lower density media without problems, provided the correct media are used for the density selected. However, if by whatever means a diskette is formatted at the wrong density, the result is a substantial risk of data loss due to magnetic mismatch between oxide and the drive head's writing attempts. Still, a fresh diskette that has been manufactured for high density use can theoretically be formatted as double density, but only if no information has ever been written on the disk using high density mode (for example, HD diskettes that are pre-formatted at the factory are out of the question). The magnetic strength of a high density record is stronger and will "overrule" the weaker lower density, remaining on the diskette and causing problems. However, in practice there are people who use downformatted (ED to HD, HD to DD) or even overformatted (DD to HD) without apparent problems; see the Floppy trivia section. Doing so always constitutes a data risk, so one should weigh out the benefits (e.g. increased space and/or interoperability) versus the risks (data loss, permanent disk damage).
Taping the right hole on a HD 3½-inch disk enables it to be 'downgraded' to DD format. This may sound counterproductive at first, but there are practical scenarios, e.g. compatibility issues with older computers, drives or devices that use DD floppies, like some electronic keyboard instruments and samplers[58] where a 'downgraded' disk can be useful, as factory-made DD disks have become hard to find after the mid-1990s. See the section "Compatibility" above. It is important to note that due to read/write voltage differences in the heads of DD vs. HD disks, writing to an HD floppy with a DD drive (or an HD drive in DD mode) is widely considered to be a highly unreliable method of storing data.

het gaat om het omgekeerde... van een HD weer een DD maken door het gat af te plakken...Als je gewone floppies heb kun je ze ook veranderen in high density..
boor pakken en dan een gaatje boren op de plek waarbij hd floppies een extra gat hebben zitten, en dan formateren als HD .. Voila!
had er vroeger honderden zo, kon er echt niet bij dat mensen dure hd floppies kochten
