x0xb0x - 303 kloon

Drool indeed :-D
 
subselector schreef:
Enig idee wanneer deze update beschikbaar is ?
Zie meer...

Hij is er, serieuze changelog deze keer, hopelijk bugvrij na zo'n aanpassingen ;) :
What's new in v2.09:
New: Shuffle! Affects patterns of step-mode 4/4, the shuffle is "global", it can go negative to positive, and the min/max range can be set from the settings (in case you never ever want to accidentally dial negative shuffle). The shuffle level is saved/loaded from the internal eeprom like the tempo.
New: Internal clock processing, dinsync polling and MIDISync2DinSync conversion is now running on a dedicated timer at 4.8kHz. Buttons and other stuff still runs on the old timer at 1kHz.
New: SPI clock boosted to 4MHz. This means that the cpu now communicates with the LEDs/buttons/EEPROM(external) twice faster. There's also a way to disable this in case it fails to work in some x0x.
changed: Optimized the pattern-loading algorithm, now it reads continuously from the eeprom without setting the address on every byte (since the eeprom itself advances it automatically).
changed: The pattern/chain selection and pitch-shift algorithms were rewritten. This affected most modes on the right side of the MODE selector.
New: Switching between some modes (while playing) is now instant and should behave like on the 303. Specifically Track-Play, Pattern-Play, Pattern-Write, Manipulate (if the pattern is not modified).
changed: When switching modes (while sequencer is stopped) - the "forced" delay of ~110ms is now ~220ms.
New: Added a "half-lit" LED state.
New: Added a "Bypass Master Start/Stop" feature. When the x0x is slaved, holding FUNCTION temporarily ignores the master Start/Stop, however the internal master clock counters still reset on start, thus it's possible to start the x0x later via Delayed-Start.
Track modes:
bugfix: trying to see where the D.C. or Sign marker is while the track is playing: the bar number display was getting overwritten by the "current bar" (playing position). Fixed.
bugfix: Track-Write mode: it wasn't possible to press WRITE/NEXT while in the pitch-shift or BAR menus. Now fixed.
New: Track-Write mode: Now it's possible to press NEXT while stopped, which only advances the bar position and discards any unsaved changes/markers.
Pattern-Write mode:
New: this mode didn't have Delayed-Start/Restart available, now it has, as long as while holding FUNCITON - the pattern length / step-mode haven't been changed.
Pitch-Mode, Time-Mode, the pattern length / step-mode menus now keep track if the pattern needs to be saved to memory or not.
New: Time-Mode: Added a function to display the time information (relative to the pattern) using the bank LEDs.
New: Pattern Length can now be adjusted also by turning the TEMPO encoder.
New: added a 4th "Bank LED display" mode, it combines Step position and Master Bar position.
bugfix: The indication of whether the pattern has been modified or not (in Manipulate, and B mode) is now more consistent. It is now also aware of changes made via MSG_PATBUF.
changed: MIDI_CONTINUE is handled now. It's treated as MIDI_START.
Computer Control mode:
New: Added a function to dump most settings in a readible way using MSG_TEXTOUT to the App (c0nb0x).
New: Added a function to display if there were missed clock ticks during the conversion from MIDISync to DinSync, using MSG_TEXTOUT.
New: The "half-lit" LED brightness can be adjusted from here.
New: Added a fancy LED animation ;]
New: Added indication of whether the x0xb0x is master or slave. If it's master, the TEMPO LED alternates between ON/OFF, otherwise ON/half-lit.
A (MIDI-Trigger) mode:
New: This mode can now be used also via the x0x buttons. And it also works in master-sync mode (RUN/STOP is available with the Hold function).
New: MIDI-Note output added.
New: Delayed-Start/Restart available now.
changed: The buttons for setting the MIDI-Note offsets for selecting patterns and pitch-shift (which were Slot1 and Slot2) are now moved to FUNCTION+DEL and FUNCTION+INS.
bugfix: Switching between this mode and the other modes in some conditions didn't select/load the right pattern. Fixed.
changed: There was a restriction of not being able to switch between patterns of different step-mode. That restriction is gone now.
New: In B mode, the pattern index (from the chain) is also shown on the bank LEDs.
bugfix: Keyboard mode was sending out MIDI Notes with wrong pitches, now fixed.
changed: Keyboard mode: The Down / Up behaviour was changed, now Down+Up is "double-up".
bugfix: MSG_TEMPO is no longer sent directly from the interrupt, but later from the main thread.
changed: Changes to the tempo and sync code.
Zie meer...

via: http://antonsavov.net/cms/projects/n0nx0x2.html
 
Dat is mooi :) denk dat ik ook wel in ben voor een update..... en kan ik hem ook meteen calibreren (volgens mij klopt het geluid niet helemaal) :)
 
Zopas bestelling geplaatst voor nieuwe panels.
Mensen op de wachtlijst krijgen in de loop van deze week een mailtje.
Ik zal er een handvol op overschot hebben mocht er nog interesse zijn.
 
Rvooh schreef:
Zopas bestelling geplaatst voor nieuwe panels.
Mensen op de wachtlijst krijgen in de loop van deze week een mailtje.
Ik zal er een handvol op overschot hebben mocht er nog interesse zijn.
Zie meer...

Hoeveel van die panels zullen er na deze nieuwe batch in omloop zijn?
Ik zie immers veel mensen die met het originele panel (en dus OS) werken en ik vind jullie update zeker prettig werken! :okdan:
 
ahja, veel mensen die hem gewoon met midi aansturen en geen ruk geven om de interne sequencer

heb geen exacte cijfers over het aantal n0nx0x gebruikers, er zijn ook mensen die zelf een panel hebben laten maken. Er zijn er meer dan 50 iig
 
Je dient in te loggen of je te registreren om een bericht te kunnen plaatsen.

Vergelijkbare discussies

sms303
Groupbuy Best of CGS Frontpanel Serge style
3 4 5
Reacties
94
Bekeken
15K
sms303
sms303
renepela
Wat hulp nodig met MS-20 filter clone
Reacties
14
Bekeken
3K
Kaftoeter
Kaftoeter
M
Propellerhead's Rebirth (808, 909 en 303 emulatie)
4 5 6
Reacties
110
Bekeken
22K
Faber
F
MatthewLeBlom
Ensoniq ASR10 + Gotek + HXC
2
Reacties
22
Bekeken
9K
barn
barn
Niel
x0xb0x optische mods
Reacties
8
Bekeken
2K
Lacertus
Lacertus
Back
Top