DSI rev2 arp noten over midi

[Vic]

Vraagje voor de DSI kenners,

Mijn rev2 zend geen noten naar midi out die van de Arpeggiator komen.
Meeste synths doen/kunnen dat wel.
Is dat een instelling? kan het niet vinden?

Mvgr,
Vic

 

[flyweight]

check ook je firmware.

To enable MIDI Note output from the arpeggiator:

1. Press the global button, then turn the parameter knob to select midi arp+seq.
2. Turn the value knob to select on.

To control an external MIDI device:

1. Connect the MIDI or USB output of the Rev2 to the MIDI or USB input of the external device, depending on which type of connection the external device requires.
2. On the Rev2, press the global button, then use the parameter knob to select midi out select.
3. Use the value knob to select midi, or usb, or midi+usb, depending on how your Rev2 and external device are connected.
4. Press the global button again to exit the Global menu.
5. On the external device, set the the MIDI Channel and MIDI Receive port to match the Rev2.
6. Hold down a chord on the Rev2 or start sequencer playback. The external device should be triggered by the arpeggiated or sequenced notes.

 

[Vic]

check ook je firmware.

Oh, ik zal dan wel oude firmware hebben, de midi arp+seq functie zit niet in Global menu.

Thnx