M-VAVE FM-1 (Ali-express DX7)

[NoelVD]

Inderdaad, ziet er netjes uit. Je kunt gaan relaxen, NoelVD!

Een aantal van die links heb ik hem bezorgd.
En hij houdt alleen open-source fw bij, die muziek maakt. Dus o.a. Baud Girl en Doom staan er niet tussen.

 

[torp]

Dat snap ik niet. Met de fw van Baud Girl kun je toch ook muziek maken?
Oké, het sleutelwoord was open source (edit: en ik zie nu dat je dat net al had geantwoord).

 

[NoelVD]

Dat snap ik niet. Met de fw van Baud Girl kun je toch ook muziek maken?

Natuurlijk
Maar het is geen “open-source”, en dus staat het niet in de zijn lijst.

 

[torp]

Dit is in elk geval een handige tip!

Download FM-1 V15 from m-vave.com and install it with the box above.
If the FM-1 is stuck, hold OCT− while switching it on (USB rescue) and install again.

 

[NoelVD]

In verband met het syncen van 2 FM-1s via Bluetooth:
Felucca en afgeleiden (Sloop, …) hebben (nog) geen Bluetooth.

De ontwikkelaar schreef:
The issue with bluetooth is dependancy on the jetli library. it's kinda big in terms of ram and rom consumption. plus it's a bit of a bear to integrateI think it'll need the build to become more modular first but I could be wrong.

Groove OS heeft wel Bluetooth:
Groove OS is built on M-VAVE's V15 firmware, not instead of it. The FM engine, the 128 stock presets, the keys, the effects, MIDI and Bluetooth are the FM-1's own. Hold OCT− and OCT+ while you switch on and it starts as the stock FM-1, until the next power-on.

 

[NoelVD]

En wat Groove OS betreft:
Groove OS is V1.1 now.
Every 1.x update is included in the one-time $29.

Met andere woorden: vanaf 2.0 betaal je opnieuw, als je die versie wil.

 

[NoelVD]

Vanmorgen zijn er weer 4 nieuwe firmwares:
Bubba, an eight-track groovebox with a sampler and a looper on every track
SLOOP Floyd FM, a visual four-operator FM engine
SLOOP DX7 Banks, twelve DX7 banks in SLOOP
WaveLoop, Felucca played from an Arturia MiniLab 3

Bron: FM-1 Firmware Hub

 

[NoelVD]

 

[MacGyverGear]

OMG.. the battle of the Firmwars has begun..

 

[NoelVD]

 

[NoelVD]

Meer details over het ontbreken van Bluetooth in Felucca en afgeleiden:

Adding BLE has a significant cost. The vendor’s Bluetooth stack alone uses roughly 250 KB of flash and 60–80 KB of RAM. On the FM-1 (1 MB flash / 512 KB RAM), making room for it would mean removing features — likely SLICE and DELAY, reducing the maximum delay time, and possibly dropping GRAIN or SAMPLER.

There is also a licensing issue: the vendor’s Bluetooth libraries are closed-source binaries, while Felucca is GPL-3.0 and currently links no proprietary vendor code.

For now, Felucca supports USB MIDI and TRS MIDI IN. USB MIDI is class-compliant and works with phones, tablets, and computers without a driver. TRS MIDI can also be used with Bluetooth-MIDI adapters.

If there is enough demand, we may consider a separate BLE edition in a future major update.